Hi
Check ALS and MS are ready or not..If ready and still problem then check cable from backside of GC as well as check cable communication hub( if used )..
You can also check this article in the Agilent Knowledge Portal: Agilent OpenLab ChemStation Autostart Macro Failed Error - Chromatography Software Articles - Chromatography Software Portal - Agilent Community
I'm using Agilent LC-MS/MS 6490 for multiresidue pesticide analysis. I'm having an issue where sometimes the instrument would not run the sequence and goes to idle (not always, but it can happen in the middle of sequence). The error is "Failed to download…
using ChemStation for HPLC 1260 infinity. Get the "ChemStation failed to initialize and will shut down" error. Already tried renaming the user.config file and it still did not work. any help would be appreciated. using Windows 7 ryoboyle thanks!
I remember hearing about a big cost saving in air / hydrogen when the 6890 came out.. There was no way to shut off the 5890 gc gaases at the end of a run. I think it was about 5000 a year if you shut off the air / h2 / makeup gas at the end of the run…
Hi there, had the same problem after the winter holidays. Nothing had been changed in the system at all. The solution was THE FIREWALL. After i checked the "trust this network connection" in my Antivirus software it started with no problems.
Hey First you need to Restart all Agilent Services, and TCP/IP and also set windows update on disable mode..
Then Reconfigure the instrument...
It should work..
I tried it too..
If this will not work you can check logs C:\Program Data\Agilent…
When I clean the local where the sample is placed and ask him to collect the background, the following message appears: "The clean check has failed. Please ensure these is no sample on the sensor and that it is open. Do you want to override the clean…
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The Agilent 2100 Bioanalyzer system run ends prematurely and the following error appears in the logbook: Run aborted on port x. Instrument error occurred on port x, Unusual...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The Agilent 2100 Bioanalyzer system electropherograms in the Agilent 2100 Expert software have a wavy, uneven baseline ( Figure 1 ).
Figure 1. Wavy, uneven baseline on Bioanalyzer...
This Information Applies To: Agilent AriaMx systems.
Issue
When IP addresses of an AriaMx instrument are reassigned, it will appear under the new and the previous IP address in the AriaMx Instrument Explorer. This situation can be prevented using...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
Sometimes, for support purposes, it is necessary to send the diagnostic test result file to Agilent support representatives.
This file contains detailed information about the...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx Real-Time PCR software
Issue
How to change the discovery protocol port in the AriaMx software.
Steps to Follow
The AriaMx software uses the UDP Broadcast protocol for...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
The instrument diagnostic tests should be run whenever it is suspected that there could be a fault with the instrument hardware.
Background
The instrument diagnostics consist...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
Error 45 is displayed on the AriaMx instrument touch screen.
Background
Error 45 is shown when the temperature recorded by one or more thermistors is outside the expected...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
AriaMx showing a series of errors after delivery, guide for troubleshooting and resolving temperature-related error.
Background
When an AriaMx is delivered, it could take...
How to Access Manual Tune in GC/MS MassHunter and MSD Productivity ChemStation
Multiple Results
This Information Applies To: MassHunter acquisition software for GC/MS systems and MSD Productivity ChemStation for all Agilent GC/MS systems
Issue
Manual tuning lets you interactively set the MSD parameters, such as lens voltages and tuning masses...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
How to find the AriaMx software and firmware version that you have installed.
Steps to Follow
There are two different ways to find out AriaMx software version:
In the...