This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx Real-Time PCR software
Issue
How to change the discovery protocol port in the AriaMx software.
Steps to Follow
The AriaMx software uses the UDP Broadcast protocol for instrument discovery and the default port number used is 60710.
In addition to the default port number, users may add their preferred port number, as long as the port number is within the valid range (Figure 1). The software only supports instrument discovery within the same subnet.
Figure 1. AriaMx PC software: instrument discovery port range error
Check the UDP Listening port for the AriaMx through the instrument touch screen under Settings > System Settings > PC Connection Settings (Figure 2). Ensure that the UDP Broadcast check box is selected.
Figure 2. AriaMx touch screen: PC connection settings
 |
Learn how to effectively operate your Agilent AriaMx: AriaMx Real-Time PCR System Setup and User Guide on Agilent.com Aria Real-Time PCR Software User Manual on Agilent.com |
For Research Use Only. Not for use in diagnostic procedures.
PR7001-1350
