The restriction capillary is put in place of the column, to protect the column and run a wear in procedure after replacing the pump seals. Or to flush the system during tests. Do you still need assistance with your request?
luciayuan Why DMF cannot go through channel D? Which pump do you have? Isocratic or Quaternary pump? For the leak rate test, I would suggest pressurize the pump at the purge valve to find out where it is leaking. I would suggest log a ticket with your…
At this time there isn't any UV deconvolution in our software. We do offer LCMS Deconvolution/Bioconfirm. Mass Spectrometry Deconvolution Software – OpenLab CDS | Agilent
MSCHU I would suggest reinstall the peristaltic pump and ensure there is flow to the seal wash sensor (top right). If not, please reach out to the local Agilent representative for technical support.
Hello,
No, you would need to have the original method used to acquire the data, already have a calibration or at least have the compounds identified.
Marty
Hi LD,
We do not recommending substituting as EGTA has higher affinity for chelating calcium ions and lower affinity for chelating Mg2+ ions compared to EDTA.
Thank you and please let me know if you have any other questions!
Courtney
This Information Applies To: Fragment Analyzer, Femto Pulse, ZAG, and their respective controller software
Issue:
If there is dried gel in the reservoir vent valve of your Agilent Fragment Analyzer, Femto Pulse, or ZAG, cleaning is required. A clogged...
This Information Applies To: 5200, 5300, 5400 Fragment Analyzer, Femto Pulse, Oligo Pro II, and ZAG
Issue:
Adding mineral oil to Agilent parallel capillary electrophoresis DNA marker plates and samples plates prevents evaporation and enables re...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, Oligo Pro II, and ZAG
Issue:
Only plasticware from the approved consumables list should be used in the Agilent Parallel Capillary Electrophoresis systems. The use of plasticware...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Question:
Can more than one Agilent 2100 Bioanalyzer instrument be connected to one PC?
Steps to follow:
It is possible to connect a maximum of two Bioanalyzers to one laptop...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer Chip Priming Station: part number 5065–4401
Maintenance procedures and how frequently they are required :
Procedure
Time interval
Or if this issue occurs
Where to find a detailed...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
Running the hardware diagnostics on the Agilent 2100 Bioanalyzer system can help to investigate whether the instrument performs as expected.
Steps to follow:
Required...
This Information Applies To: 2100 Bioanalyzer, RNA 6000 Nano kit, RNA 6000 Pico kit, Small RNA kit
Issue:
Is it possible to size RNA on the Agilent 2100 Bioanalyzer system?
Resolution:
Agilent offers total and small RNA assays on the Bioanalyzer...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue:
The Agilent 2100 Bioanalyzer system does not detect a prepared microfluidic chip after it is inserted into the instrument. The interface shows the instrument...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer chips
Issue:
Can 2100 Bioanalyzer assay chips and reagents be interchanged?
Resolution:
Some assay chips can be used with multiple assays, however some cannot because the chip layout...
This Information Applies To: Agilent MassHunter GC/MS Acquisition software
Issue
The MassHunter software performs several checks during the startup sequence. If it detects a problem, an alert message box will be displayed and the message bar on...