Hi;
Got the message: check seal wash flowpath for proper operation. Flow path is OK, droplets at the end are visible. Agilent 1290 InfinityII. EMV warning still appears afet 10 minutes of flushing.
Thanks
Find maintenance, best practice, and troubleshooting articles.
Hi;
Got the message: check seal wash flowpath for proper operation. Flow path is OK, droplets at the end are visible. Agilent 1290 InfinityII. EMV warning still appears afet 10 minutes of flushing.
Thanks
MSCHU I would suggest reinstall the peristaltic pump and ensure there is flow to the seal wash sensor (top right). If not, please reach out to the local Agilent representative for technical support.
MSCHU I would suggest reinstall the peristaltic pump and ensure there is flow to the seal wash sensor (top right). If not, please reach out to the local Agilent representative for technical support.