What version of WinUV do you have? We were delivered WinUV 5.1.3 with .1042 (Part 11 security module).
The system was built with a tutorial in Adobe Flash but unfortunately for all of us, Flash was discontinued worldwide for security reasons. This meant…
Hi,
I suggest to run an auto-tune, then you will have a checktune report at the end of a sucessful auto-tune. If the auto-tune fails for the same reason you have mentioned and gives the same error message and you are sure the bottle not empty and nebulizer…
Basically you must create standard calibration level with level name as you wish, and u will not use this level for calibration, but only for comparing your QC in batch table with this "calibration level".
Hi Sabbas, The "Peaks and Valleys" option can be used to label both peaks and valleys on the same spectrum.
Right-click on any dataplot and click "Peak Labels", and under "Peak Type", select "Peaks and Valleys". If the "Threshold" value is set up according…
This is a compilation of some of the most useful GPC/SEC System resources, including recommended column and standards, software packages, theory and operation, user manuals and troubleshooting guides.
GPC and SEC Columns & Standards for Polymer & Plastic…
Hi martin.adams , you are exactly right, the peak width is small, therefore it is not giving the final S/N value. When I manually integrated the peak by increasing the peak width, it gave the value. It seems i need to fix the time range for the baseline…
Hi LD,
You are very welcome! Table 25.2.1 in the paper above gives recommendations. You can also take a look at our Cell Publication Database to see what others have done as far as this.
Thank you and let me know if you have any other questions…
This Information Applies To: All OpenLab CDS ChemStation Edition software-Standalone Workstation
Issue
After launching OpenLab ChemStation Online, the following error is shown: “ChemStation ChemMain has stopped working” . OpenLab ChemStation Online...
This Information Applies To: Agilent AriaMx, Software version 1.8 and later
Issue
The Aria Warm up Feature was introduced with Aria SW/FW 1.8 to reduce baseline drift. The warm-up feature is used to speed up the heating process that would normally...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
When a sample name starts with zero, the leading zero disappears from the exported data ( Figure 1 and Figure 2 ).
Background
Removing the leading...
This Information Applies To: Agilent 7890B GC system and 7697A headspace sampler
Issue
The 7697 Headspace Sampler can be configured to communicate directly with the 7890B GC. When this direct communication is configured, the 7697A headspace gets...
This Information Applies To: Agilent GC/MSD systems
Issue:
When performing MS tuning, there is error message "No Emission Current" and tune is aborted.
Steps to Follow
This error normally means that the selected filament is not working. Perform...
This Information Applies To: Agilent OpenLab CDS
Issue
Any desired processing method can be assigned to the current Result Set.
Requirements
A result set available to link the method to.
Correct Privilege (Role Membership) set up for the...
This Information Applies To: Agilent LC and CE Systems compatible with Lab Advisor
Issue:
Firmware is updated or downgraded when new features are added, or to fix some system bugs. It also solves compatibility issues when a new module is added to...
This Information Applies To: Agilent OpenLab CDS
Issue
This article shows how to export a report of peak area and retention time of a sequence in an Excel format.
Prerequisites
To be able to carry out the procedure as described, privileges...
This Information Applies To: Agilent OpenLab CDS
Issue
Reports in OpenLab CDS can be printed or saved manually in Data Analysys, or automatically during reprocessing, or acquisition.
Requirements
The user needs the following Roles and Privileges...
This Information Applies To: Agilent 5975 and 5977 Series GC/MSD systems.
Issue
During tuning, MassHunter prompted the error message: "MSD Fault- RFPA Difficulty", and tune action stopped.
Steps to Follow
Try to reconfigure the GC/MS....