Hey everyone,
I'm looking for some help regarding some communication issues we're experience on the QQQ 6470 after starting it up. Upon starting the QQQ up after a temporary shut down, we are now having troubles with initializing communication and unable…
Is the tutorial available for the " Cary WinUV (Pharma) software complements the Cary 60 UV-Vis spectrophotometer" software? Could we use the WinUV 5.3 Tutorial for the WinUV 5.1.3 software where the tutorial does not work for us because it's written…
Hello, Jorge! Have you ever try to change gain? Go to Gain Adjust e try to put close to 25000. If it still continue red, try to purge your IR with nitrogen gas. If you prefer to speak in pt-br send me a mensager.
Sudhini , increasing the Electron Multiplier Voltage (EMV) will increase the detector response for all analytes.
Depending on the m/z of your impurity vs what you are filtering on in the MRM, your impurity may not be detected as it would need to have…
Thank you Ron,
I tried some templates, and it seems like the one called "Gen_LIMs_xmlOutput" already includes everything. Now my only problem is the custom calculation regarding Question 5 listed above. I will look in it.
Thank you again for your…
Hello dimei ,
In qual it is not easy to combine the compound results, which contain the compound name and RI, along with the peak list results, which contains the Area Sum Percent. The closest you can get in qual is the compound summary CSV export option…
I was able to figure it out on my own. Here is the code for anyone in the future who needs to solve this same issue:
peak = None if cmpd.IsPrimaryHitPeakIDNull() else DataProvider.GetPeak(istd.BatchID, istd.SampleID, cmpd.CompoundID, cmpd.PrimaryHitPeakID…
This Information Applies To: AriaMx real-time qPCR system
Issue
The instrument fails to reach the required temperature during a run.
Resolution
Check if the temperature of the environment around the instrument is too low resulting in the instrument...
This Information Applies To : Agilent ELSDs G4260A, G4260B, G4261A, G4621B, G7102A, G7102B
Content :
If the evaporator tube of ELSD becomes contaminated with nonvolatile material resulting in poor chromatography, please use the procedure in this...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
The oil should be replaced at least once every six months, or when the oil color is indicates it needs to be changed . The foreline pump should be checked monthly. This article...
This Information Applies To: Agilent ICP-MS MassHunter versions 4.4 - 4.6 and 5.x.
Issue
After performing an autotune, the batch tune report will not generate or print.
Background
ICP-MS MassHunter uses an application called ICP-MS Data Analysis...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve
Issue
Installing the Ion Transfer Capillary after cleaning or replacement in Agilent LC/MS instruments with a gate valve.
Required Items...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify uncalibrated compounds in OpenLab CDS 2.x. using reference compounds in the processing method compound table.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify the uncalibrated compounds in OpenLab CDS 2.x when the analytical method requires a fixed response factor.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
When your Agilent OpenLab ChemStation Edition software fails to launch with errors " Login failed with the following message: Configuration system failed to...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
Agilent OpenLab ChemStation Edition software fails to launch with error containing the words " Autostart Macro failed ”. This article will provide you some...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer and Oligo Pro II instruments, and their respective controller software.
Issue Failed to build pressure error comes up shortly after starting a separation...