Hi Everyone. I ran GFS on Agilent 1100 HPLC, and the profile is atypical. It seems to be missing a peak and there is also a negative peak. Does anyone know what might be going on?
Mobile phase: 25 mM Ammonium Acetate, pH 8 (not filtered)
Flow rate…
6.80? It's getting a little confusing now. There never was a FW 6.80 for the G1321B, but maybe you had that on your pump. You did not talk about the configuration you have.
If entire stack gets updated to latest FW and you still see an issue, it is…
Hi Pillai,
Thank you for this information. I recommend trying a different cellular adhesive to see if this improves the detaching. Additionally, you may want to increase your seeding density as 10K/well was used in this paper (though these cells were…
Important Information to Set Up Agilent as a Vendor
The Agilent and eMSion teams are excited to announce that, as of 3 June 2024, orders for all products will be handled by Agilent. The currently available software and hardware have been added to Agilent…
Join Agilent Senior Application Engineer, John Screech, live as he explores the critical concepts of vacuum.
We’ll begin with Q = P x S, the formula that explains EVERYTHING about the relationship between gas load, pumping speed, and pressure. John…
This Webinar focuses on the challenges in progressing from High Vacuum (approx. 10^-8 Torr) to Ultra-High Vacuum (below 10^-9 Torr) Pressure. Ion Pumps and Cryo-Molecular pumps are discussed in detail, as are the modifications to High Vacuum Gauges that…
Paul thanks for your reply. I have looked for information about these traps because I have two RMSH-2 traps and I thought about using one for the carrier gas (He) and the other for the FID hydrogen. Anyway, I'm going to buy the hydrogen trap. Thanks …
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...