I'm using the GC6890 with one single column (CP7429). The gas products have to be analyzed by TCD and FID simutaneously. How should I connect the column to TCD and FID? Is it necessary to have a s plitter to split effluent from a single column to TCD…
Lately, we are having major issues with Masshunter failing on injections. I put a table listing our operating systems and the masshunter versions installed. The error we are getting is : MSQQQ_1:Failed to write scan record to the data file . We are writing…
Hi shaneo did you solve the problem? I am having the same issue now and I am wondering if you could solved it and can help me what you did. Thanks in advance.
Situation: When launching an installation of OpenLab Chemstation C.01.07, the 'Connection to selected server failed' error appeared. Agilent OpenLab Shared Services service was not started, and attempting to manually start the service yielded the following…
I recently had this issue, even with methods that had worked previously. It became apparent that this was happening at a particular temperature and once that temperature was reached, the inlet would shutdown and the error would pop-up. It became apparent…
I got a rare error after re-installing MassHunter Acquisition B 06.01. This error made all my Acquisition analysis methods unable to read. Note: The reason why I re-installed MassHunter Acquisition B06.01 was the software was doing some wired things;…
If cartridge does not eject after assay has completed, this document can be used to help troubleshoot. Here is a list of the most common causes for this error: User improperly loaded cartridge/cell plate User loaded two cartridges into instrument at once…
Hi, I have an old Agilent 1120 compact system running on a computer with ChemStation B. 04.03, last week the computer failed and never got back, I reinstalled the ChemStation software using the Disk provided at the time of purchase, but don't have the…
To be honest, you use Mustang to process a FID data? is odd, but here is something that I switching back and forth between Enhensed DA and EPA Quant, First you need to have the command line on, type Enhanced 1 and press Execute to go to EPA, and Enhanced…
This Information Applies To: HES ion source in 5977B/C GC/MSD, 7010 triple quadrupole GC/MS systems
Issue
The filaments are replaced as part of routine maintenance, or when they break (zero output current).
Items Required
Gloves, nylon,...
This Information Applies To: Agilent 5977A/B/C GC/MSD
Issue
The Electron Multiplier Horn must be replaced when it is contaminated or the EMV value reaches 3000 V with a clean ion source.
Items Required
Electron multiplier horn (5977B/C:...
This Information Applies To: Agilent 5973/ 5975/5977 GC/MSD with rotary vane foreline pump
Issue:
The oil mist filter is recommended to be replaced annually. If the color of the filter has changed or there is smell from the filter, the oil mist...
This Information Applies To: Agilent EI Source
Issue:
During normal operation of the GC/MS, the EI SST/Inert ion source will need to be disassembled to proceed with abrasive ion source cleaning and / or routine replacement of consumable parts (filaments...
This Information Applies To: Agilent G7129A/B/C Vialsampler
Issue:
Replacing the needle and needle seat of the Vialsampler is required when:
The needle is visibly damaged.
Leaks or blockages in the vialsampler are observed, especially between...
This Information Applies To: Agilent G1311A/B/C, G7111A/B, Quaternary Pumps, and G1310A/B, G7110B Isocratic Pumps, G1312A/B/C, G7112B Binary Pumps
Issue:
How to diagnose no flow or no pressure issues on binary, quaternary, or isocratic pumps.
...
This Information Applies To: Agilent UV and RID detectors
Issue
A clogged flow cell causes high backpressure. The clog can be removed by flushing the system with solvents at high pressure. If you suspect a clog or experience high backpressure due...
This Information Applies To: Agilent G1312X and G7112X binary pumps.
Issue:
A blockage before the pressure sensor, e.g. in a pump head, will not give a high pressure or overpressure system error. Instead, the pump may show one of various error messages...
This Information Applies To: Agilent 1100, 1200, 1260 LC Pumps.
Issue:
The following procedure allows the cleaning of residue from the pump's check valves, often caused by polymerization of aged acetonitrile or salt-based solutions that may prevent...
This Information Applies To: Agilent LC Systems
Issue
After analyzing dirty or concentrated samples, some sample compounds may retain in the column and other parts of the HPLC system. If the column re-equilibration after each run is not enough to...