Hello, you can export sequences into a new project file.
- Select a sequence of a loaded project and click Export data in the [project management] window.
- The now open window allows you to select more sequences from this project to export (see…
Depending on the software, linear and/or polynomial regression models are supported. Strictly speaking, linear fits can only be used for linear columns. However, it is also observed here that a polynomial fit may be more suitable depending on the column…
As you have already mentioned, HFIP is a very aggressive solvent that has a high density at a low boiling point.
Note that only the external degassers G1322/G7122 are compatible with HFIP. HFIP analyses are usually run with KTFAc as a salt additive…
Hello,
Typically, it is difficult to determine the issues with AV and security software within the logs. You could look into the acquisition server logs around the time the crash happened. I would also look at the windows event logs for other activity…
The Agilent TRS100 Quantitative Pharmaceutical Analysis system has been certified with My Green Lab’s ACT label in the EU, UK, and US. This clear, third-party verified information about the system’s environmental impact makes it easy for laboratories…
The phenomenon you describe is inevitable for broad polymer samples: The signal intensity (SI), of all detectors depends on injected mass (concentration and injection volume), a sample related constant k Sample (i.e., response factor), and a detector…
Hi,
In your case, the path of the column database must be adjusted. This is done as follows:
1) Close WinGPC software 2) Search registry editor (Windows logo key + "regedit") and run it as administrator (possibly involve your IT department) 3) Find…
This Information Applies To: Agilent OpenLab CDS
Issue
Reports in OpenLab CDS can be printed or saved manually in Data Analysys, or automatically during reprocessing, or acquisition.
Requirements
The user needs the following Roles and Privileges...
This Information Applies To: Agilent 5975 and 5977 Series GC/MSD systems.
Issue
During tuning, MassHunter prompted the error message: "MSD Fault- RFPA Difficulty", and tune action stopped.
Steps to Follow
Try to reconfigure the GC/MS....
This Information Applies To: Agilent OpenLab CSD 2.5 and above
Issue
The integration optimizer helps find a suitable set of integration events. It allows integration parameters to be tuned via sliders (peak width, slope sensitivity, height reject...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The Agilent 2100 Bioanalyzer system run ends prematurely and the following error appears in the logbook: Run aborted on port x. Instrument error occurred on port x, Unusual...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The Agilent 2100 Bioanalyzer system electropherograms in the Agilent 2100 Expert software have a wavy, uneven baseline ( Figure 1 ).
Figure 1. Wavy, uneven baseline on Bioanalyzer...
This Information Applies To: Agilent AriaMx systems.
Issue
When IP addresses of an AriaMx instrument are reassigned, it will appear under the new and the previous IP address in the AriaMx Instrument Explorer. This situation can be prevented using...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
Sometimes, for support purposes, it is necessary to send the diagnostic test result file to Agilent support representatives.
This file contains detailed information about the...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx Real-Time PCR software
Issue
How to change the discovery protocol port in the AriaMx software.
Steps to Follow
The AriaMx software uses the UDP Broadcast protocol for...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
The instrument diagnostic tests should be run whenever it is suspected that there could be a fault with the instrument hardware.
Background
The instrument diagnostics consist...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
Error 45 is displayed on the AriaMx instrument touch screen.
Background
Error 45 is shown when the temperature recorded by one or more thermistors is outside the expected...