Hello,
As I said in a previous post, the sample prep method object and field items were added in CDS 2.7 to the available report objects. It looks like from your screenshot you have CDS 2.5 installed so those will not be options.
Marty
Saturation is reported by ion, not by TIC abundance.
The maximum possible abundance per ion on SQ instruments is approximately 8.4 × 10^6. To stay within the linear range of the electron multiplier it is recommended to be <= 2.0 × 10^6 per ion.
Please…
The file is a pre-set qPCR program to run a plate filled with water used to test the basic raw fluorescence signal of AriaMx Optical modules.
File required for Performing a Background Calibration
The GC cycle time should be the time from injection until the GC is ready to run again. This includes the analysis run, cool down, and equilibration. Based on the times you listed, it would be roughly 40 minutes. It may be worth timing to make sure. The…
Hi howard_sanford, my apologies for a slow response, but thank you very much for the help and advice. I was able to get the filter for Cal and CC to work, and I appreciate the discussion of my larger problem. I think I'm probably several (many) steps…
Hello, thank you for your help. I had tried loading different processing methods but I didn't realize the results were not linked to any method. It turns out the result files were read-only and could not be linked to any method. I moved the result files…
The peaks look similar, essentially the same sensitivity. I'd look at the background on your older runs and the background now. It could be that most of the previous background was one, two, a few, ions and they're gone now. Was that small but still noticeable…
This Information Applies To: Agilent Single Quad GC/MS instruments
Issue
Turn on and pump down the Single Quad GC/MS to an operating vacuum using OpenLab CDS software.
Background
The GC/MS needs to operate at a vacuum that is high enough to...
This Information Applies To: Agilent Parallel capillary electrophoresis platforms, 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, and their respective controller software
Issue
If you have saved changes to the methods and wish...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
When should the AriaMx diagnostics be run?
Resolution
Agilent Technologies does not provide a specific recommendation regarding when to run instrument...
This Information Applies To: Agilent ICP-MS MassHunter Software 4.5 and later with User Access Control (UAC).
Issue
When trying to access Change User Access Control (UAC) Application and the user gets permissions errors, they are usually related...
How to Create a New Database in Spectroscopy Database Administrator (SDA)
Multiple Results
This Information Applies To: Spectroscopy Database Administrator (SDA)
Issue
If the old database is full, or after a specific time interval, it is necessary to create a database in SDA. If you receive a message telling you that the database is full...
Update Database Group Path in Spectroscopy Configuration Manager (SCM)
Multiple Results
This Information Applies To: Agilent Spectroscopy Configuration Manager (SCM)
Issue
It is necessary to add a database to a group path in SCM after creating a new database in Spectroscopy Database Administrator (SDA) . If access to an older database...
How to Access Spectroscopy Database Administrator Software (SDA)
Multiple Results
This Information Applies To: Agilent Spectroscopy Database Administrator Software
Issue
The SDA application can only be accessed by a Windows user who is a member of the Windows Administrators group and Windows SDAAdministrators group.
Steps...
This Information Applies To: AriaMx real-time qPCR system
Issue
The instrument fails to reach the required temperature during a run.
Resolution
Check if the temperature of the environment around the instrument is too low resulting in the instrument...
This Information Applies To : Agilent ELSDs G4260A, G4260B, G4261A, G4621B, G7102A, G7102B
Content :
If the evaporator tube of ELSD becomes contaminated with nonvolatile material resulting in poor chromatography, please use the procedure in this...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
The oil should be replaced at least once every six months, or when the oil color is indicates it needs to be changed . The foreline pump should be checked monthly. This article...