Hey everyone,
I'm looking for some help regarding some communication issues we're experience on the QQQ 6470 after starting it up. Upon starting the QQQ up after a temporary shut down, we are now having troubles with initializing communication and unable…
Is the tutorial available for the " Cary WinUV (Pharma) software complements the Cary 60 UV-Vis spectrophotometer" software? Could we use the WinUV 5.3 Tutorial for the WinUV 5.1.3 software where the tutorial does not work for us because it's written…
Hello, Jorge! Have you ever try to change gain? Go to Gain Adjust e try to put close to 25000. If it still continue red, try to purge your IR with nitrogen gas. If you prefer to speak in pt-br send me a mensager.
Sudhini , increasing the Electron Multiplier Voltage (EMV) will increase the detector response for all analytes.
Depending on the m/z of your impurity vs what you are filtering on in the MRM, your impurity may not be detected as it would need to have…
Thank you Ron,
I tried some templates, and it seems like the one called "Gen_LIMs_xmlOutput" already includes everything. Now my only problem is the custom calculation regarding Question 5 listed above. I will look in it.
Thank you again for your…
Hello dimei ,
In qual it is not easy to combine the compound results, which contain the compound name and RI, along with the peak list results, which contains the Area Sum Percent. The closest you can get in qual is the compound summary CSV export option…
I was able to figure it out on my own. Here is the code for anyone in the future who needs to solve this same issue:
peak = None if cmpd.IsPrimaryHitPeakIDNull() else DataProvider.GetPeak(istd.BatchID, istd.SampleID, cmpd.CompoundID, cmpd.PrimaryHitPeakID…
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...
This Information Applies To: Agilent 8890/8860 GC Systems with SSL, MMI, PTV, or VI inlets.
Issue
Split vent trap replacement is recommended as part of the scheduled preventive maintenance. Sometimes, it has to be replaced when the inlet pressure...
This Information Applies To: Agilent 6000 Series LC/MS systems equipped with MS40+ rotary vane pumps
Issue
Instructions on how to replace the filter in an Agilent MS 40+ pump as part of annual pump maintenance
Background
The filter in the...
This Information Applies To: Agilent ICP-OES 5000 Series (5100/5110/5800/5900) with ICP Expert 7.5.x Software
Issue
The Recommended Routine Maintenance Schedule does not adjust for the number of samples analyses or the sample matrix, both of which...