The slope of the second plateau in the leak test for the quat pump of our Agilent 1100 fails. We are getting a negative slope of -2.18. Pressure and slope for the first plateau passed. Pressure for second plateau passed but the slope was negative giving…
What version of WinUV do you have? We were delivered WinUV 5.1.3 with .1042 (Part 11 security module).
The system was built with a tutorial in Adobe Flash but unfortunately for all of us, Flash was discontinued worldwide for security reasons. This meant…
Hi,
I suggest to run an auto-tune, then you will have a checktune report at the end of a sucessful auto-tune. If the auto-tune fails for the same reason you have mentioned and gives the same error message and you are sure the bottle not empty and nebulizer…
Basically you must create standard calibration level with level name as you wish, and u will not use this level for calibration, but only for comparing your QC in batch table with this "calibration level".
Hi Sabbas, The "Peaks and Valleys" option can be used to label both peaks and valleys on the same spectrum.
Right-click on any dataplot and click "Peak Labels", and under "Peak Type", select "Peaks and Valleys". If the "Threshold" value is set up according…
This is a compilation of some of the most useful GPC/SEC System resources, including recommended column and standards, software packages, theory and operation, user manuals and troubleshooting guides.
GPC and SEC Columns & Standards for Polymer & Plastic…
Hi martin.adams , you are exactly right, the peak width is small, therefore it is not giving the final S/N value. When I manually integrated the peak by increasing the peak width, it gave the value. It seems i need to fix the time range for the baseline…
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...