You can also check this article in the Agilent Knowledge Portal: Agilent OpenLab ChemStation Autostart Macro Failed Error - Chromatography Software Articles - Chromatography Software Portal - Agilent Community
Hi
Check ALS and MS are ready or not..If ready and still problem then check cable from backside of GC as well as check cable communication hub( if used )..
I'm using Agilent LC-MS/MS 6490 for multiresidue pesticide analysis. I'm having an issue where sometimes the instrument would not run the sequence and goes to idle (not always, but it can happen in the middle of sequence). The error is "Failed to download…
using ChemStation for HPLC 1260 infinity. Get the "ChemStation failed to initialize and will shut down" error. Already tried renaming the user.config file and it still did not work. any help would be appreciated. using Windows 7 ryoboyle thanks!
I remember hearing about a big cost saving in air / hydrogen when the 6890 came out.. There was no way to shut off the 5890 gc gaases at the end of a run. I think it was about 5000 a year if you shut off the air / h2 / makeup gas at the end of the run…
Hi there, had the same problem after the winter holidays. Nothing had been changed in the system at all. The solution was THE FIREWALL. After i checked the "trust this network connection" in my Antivirus software it started with no problems.
Hey First you need to Restart all Agilent Services, and TCP/IP and also set windows update on disable mode..
Then Reconfigure the instrument...
It should work..
I tried it too..
If this will not work you can check logs C:\Program Data\Agilent…
When I clean the local where the sample is placed and ask him to collect the background, the following message appears: "The clean check has failed. Please ensure these is no sample on the sensor and that it is open. Do you want to override the clean…
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, Oligo Pro II, and ZAG
Issue:
Only plasticware from the approved consumables list should be used in the Agilent Parallel Capillary Electrophoresis systems. The use of plasticware...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Question:
Can more than one Agilent 2100 Bioanalyzer instrument be connected to one PC?
Steps to follow:
It is possible to connect a maximum of two Bioanalyzers to one laptop...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer Chip Priming Station: part number 5065–4401
Maintenance procedures and how frequently they are required :
Procedure
Time interval
Or if this issue occurs
Where to find a detailed...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
Running the hardware diagnostics on the Agilent 2100 Bioanalyzer system can help to investigate whether the instrument performs as expected.
Steps to follow:
Required...
This Information Applies To: 2100 Bioanalyzer, RNA 6000 Nano kit, RNA 6000 Pico kit, Small RNA kit
Issue:
Is it possible to size RNA on the Agilent 2100 Bioanalyzer system?
Resolution:
Agilent offers total and small RNA assays on the Bioanalyzer...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue:
The Agilent 2100 Bioanalyzer system does not detect a prepared microfluidic chip after it is inserted into the instrument. The interface shows the instrument...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer chips
Issue:
Can 2100 Bioanalyzer assay chips and reagents be interchanged?
Resolution:
Some assay chips can be used with multiple assays, however some cannot because the chip layout...
This Information Applies To: Agilent MassHunter GC/MS Acquisition software
Issue
The MassHunter software performs several checks during the startup sequence. If it detects a problem, an alert message box will be displayed and the message bar on...
This Information Applies To: Agilent MassHunter Quantitative Data Analysis Software
Issue:
The "NO DATA POINTS" error message appears in the Compound Information window in the lower-left corner in Quantitative Analysis. Sometimes, this problem may...
This Information Applies To: Agilent GC/MSD MassHunter with MSD ChemStation Data Analysis
Issue
When you are using the Data Analysis Report, you may need to specify a certain number of decimal places for your results different to the default decimal...