I'm using the GC6890 with one single column (CP7429). The gas products have to be analyzed by TCD and FID simutaneously. How should I connect the column to TCD and FID? Is it necessary to have a s plitter to split effluent from a single column to TCD…
Lately, we are having major issues with Masshunter failing on injections. I put a table listing our operating systems and the masshunter versions installed. The error we are getting is : MSQQQ_1:Failed to write scan record to the data file . We are writing…
Hi shaneo did you solve the problem? I am having the same issue now and I am wondering if you could solved it and can help me what you did. Thanks in advance.
Situation: When launching an installation of OpenLab Chemstation C.01.07, the 'Connection to selected server failed' error appeared. Agilent OpenLab Shared Services service was not started, and attempting to manually start the service yielded the following…
I recently had this issue, even with methods that had worked previously. It became apparent that this was happening at a particular temperature and once that temperature was reached, the inlet would shutdown and the error would pop-up. It became apparent…
I got a rare error after re-installing MassHunter Acquisition B 06.01. This error made all my Acquisition analysis methods unable to read. Note: The reason why I re-installed MassHunter Acquisition B06.01 was the software was doing some wired things;…
If cartridge does not eject after assay has completed, this document can be used to help troubleshoot. Here is a list of the most common causes for this error: User improperly loaded cartridge/cell plate User loaded two cartridges into instrument at once…
Hi, I have an old Agilent 1120 compact system running on a computer with ChemStation B. 04.03, last week the computer failed and never got back, I reinstalled the ChemStation software using the Disk provided at the time of purchase, but don't have the…
To be honest, you use Mustang to process a FID data? is odd, but here is something that I switching back and forth between Enhensed DA and EPA Quant, First you need to have the command line on, type Enhanced 1 and press Execute to go to EPA, and Enhanced…
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, Oligo Pro II, and ZAG
Issue:
Only plasticware from the approved consumables list should be used in the Agilent Parallel Capillary Electrophoresis systems. The use of plasticware...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Question:
Can more than one Agilent 2100 Bioanalyzer instrument be connected to one PC?
Steps to follow:
It is possible to connect a maximum of two Bioanalyzers to one laptop...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer Chip Priming Station: part number 5065–4401
Maintenance procedures and how frequently they are required :
Procedure
Time interval
Or if this issue occurs
Where to find a detailed...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
Running the hardware diagnostics on the Agilent 2100 Bioanalyzer system can help to investigate whether the instrument performs as expected.
Steps to follow:
Required...
This Information Applies To: 2100 Bioanalyzer, RNA 6000 Nano kit, RNA 6000 Pico kit, Small RNA kit
Issue:
Is it possible to size RNA on the Agilent 2100 Bioanalyzer system?
Resolution:
Agilent offers total and small RNA assays on the Bioanalyzer...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue:
The Agilent 2100 Bioanalyzer system does not detect a prepared microfluidic chip after it is inserted into the instrument. The interface shows the instrument...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer chips
Issue:
Can 2100 Bioanalyzer assay chips and reagents be interchanged?
Resolution:
Some assay chips can be used with multiple assays, however some cannot because the chip layout...
This Information Applies To: Agilent MassHunter GC/MS Acquisition software
Issue
The MassHunter software performs several checks during the startup sequence. If it detects a problem, an alert message box will be displayed and the message bar on...
This Information Applies To: Agilent MassHunter Quantitative Data Analysis Software
Issue:
The "NO DATA POINTS" error message appears in the Compound Information window in the lower-left corner in Quantitative Analysis. Sometimes, this problem may...
This Information Applies To: Agilent GC/MSD MassHunter with MSD ChemStation Data Analysis
Issue
When you are using the Data Analysis Report, you may need to specify a certain number of decimal places for your results different to the default decimal...