The Digest of upcoming webinars has been updated as of July 17.
Check out the Perfect Your PFAS Workflows webinar series here .
Notable additions include:
PFAS (2)
Check Out:
Analysis of Multiple Elements in Lithium Salts using an Autodilution…
Category/Series
Recorded/Upcoming Date
Recording Link
Atomic
7/23/2024
Analysis of Multiple Elements in Lithium Salts using an Autodilution ICP-OES Workflow
Atomic
8/6/2024
Elemental Analysis of Lithium-ion Battery Samples…
Thank you for your reply. I have not worked much with Gas GCs and I am not that familiar with different parts of it. I have performed leak check around front inlet and inside oven compartments (around columns). There was no leak. Could you please show…
The May 2011 issue of Dissolution Technologies ( https://dissolutiontech.com/DTresour/BackIssuefldr/BackIssuesfrmst.html ) compiles a lot of the thoughts of various agencies regarding the use of the alternate MQ procedure. MQ does have acceptance in most…
This is normal as PONA columns are apolar phases with thin films. For your light HC's < C5 either a thick film (ca. 5 µm) or another phase/column would help, but higher HC's cannot be done then (see also Lance's answer). It's either switching or backflushing…
Hi xiangui Are you running different methods in different worklists, or are the worklists all running the same method? I assume the same method across worklists, but this is not clear in your question.
Does this change in pressure lead to a change in…
Hi danielchsny , Yes power spikes from unscheduled power interruptions can cause damage to sensitive electronic circuits. Another contributing factor is that when power is lost to the LC/MS running under high vacuum the rough pump will stop, causing a…
This Information Applies To: 4150 TapeStation, 4200 TapeStation
Issue
How to deal with a TapeStation Electrode Cartridge change is due warning message.
Background
The Agilent TapeStation controller software will notify users to replace the...
This Information Applies To: Agilent OpenLab CDS
Issue
Sometimes the integration result is not ideal for all injections. This article outlines the step-by-step instruction to manually integrate peaks.
Background
There are 2 ways to integrate...
This Information Applies To: Agilent OpenLab CDS , Agilent OpenLab ChemStation
Issue
Calculation of Area percent or Height percent for uncalibrated compounds in OpenLab software. If all components respond equally in the detector, then Area% and...
This Information Applies To: Agilent ICP-MS (7700/7800/7850/7900/8800/8900)
Issue
How to power off the Agilent ICP-MS Foreline Pump to perform maintenance, or when fully powering off the Agilent ICP-MS System.
Background
The ICP-MS MassHunter...
This Information Applies To: Agilent ICP-MS (7500,7700,8800)
Issue
How to check the E2M18 or E2M18F foreline pump to determine if the pump needs maintenance?
Background
The oil cleanliness and oil level in the E2M18 or E2M18F foreline pump...
This Information Applies To: Agilent ICP-MS (7700/7800/8800)
Issue
How to replace the foreline pump oil in the DS 402.
Background
The DS 402 oil should be replaced at least every 3 months or when the oil color indicates it needs to be changed...
This Information Applies To: Agilent 8890/8860 GC Systems
Issue
How to delete data that is stored on the GC instrument.
Steps to follow
Caution : Before deleting data from your GC, Agilent recommends extraction of data as a backup...
This Information Applies To: 5200, 5300 and 5400 Fragment Analyzer, Femto Pulse and ZAG DNA analyzer
Issue
When no data is available in the Agilent ProSize data analysis software for one or more capillaries, the capillary(ies) could be misaligned...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
How to check the MS40+ or MS40-S foreline pump to determine if the pump needs maintenance?
Background
The oil's cleanliness and level, in the MS40+ or MS40-S foreline...
This Information Applies To: Agilent ICP-MS systems (7700/7800/7850/7900/8800/8900)
Issue
Powering on Agilent ICP-MS Systems after maintenance, long-term shutdown, or for power cycling.
Steps to Follow
Confirm that the ICP-MS power plug...