Hi, the peak area has no influence on the calculation of Mw when measuring with concentration detectors only (RI, UV, ELSD e.g.). When performing Viscometry & Lightscattering measurements, the peak area is needed for the calculation. As an additional…
Occasionally the tune files get corrupted and you need to go back to an old one or start again from the default atune.u file. Glad the problem is resolved!
Part 1 included many questions and some answers about the maximum abundance that should be detected at the electron multiplier. Another important consideration is how much sample should go into the column.
See Which Electron Ionization Ion Source? Part…
Thank you for taking a moment to review the Community Guidelines. You agree to all of the guidelines posted and linked here when using the Agilent Community. These guidelines are here to help you be a valuable contributor to the community and make sure…
Hi, I have an old 6890 with a jet direct card. We lost power to the instrument and since then it has not been able to connect to the PC. I tried updating the bootp software with the correct mac address and power cycled instrument with the same issue.…
Support and educational resources for the Microplate Centrifuge and Automated Centrifuge Loader .
Automation Solutions Knowledge Base
Microplate-Handling Device Guides
PDF user guides
Support Documents
G5582A Centrifuge Installation Checklist…
-Have you tried a diferent column ? An old column could have retention time issues and peak distortion.. -Have you had any pressure fluctuations during your run ? Try running a Pump leak rate test, to see if the problem is not in the pump-head. -Do a…
This Information Applies To: Agilent MassHunter Qualitative Analysis Software
Issue
Error message prompted “Access to the path C:\Users\AgilentMad\AppData\Local\Temp\FILESPEC.TXT is denied" during search using NIST MS Program in MassHunter Qualitative...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
When sending a run configuration from the AriaMx PC software, no run configuration is transmitted. The expected blue confirmation icon does not appear at the bottom of the touch...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
Can the AriaMx software be used on Windows 11?
Resolution
The AriaMx a nalysis software 2.0 has not been validated for Windows 11, so Agilent...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
How to control more than one AriaMx with one PC.
Resolution
If you connect the PC and instruments using an ethernet cable, you will not be able to establish multiple connections...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
In the Export Data menu, after exporting data in a LIMS format, the output file's name is incomplete.
Background
An example of everything after...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
The AriaMx Data saving behavior when priming experiments from the PC is dependent upon whether the user is logged in or a Guest and whether the user...
This Information Applies To: Agilent OpenLab CDS
Issue
Sequence Creation Template allows users to create a sequence template that identifies the order of injections or actions in the sequence.
This article outlines the step-by-step instruction...
This Information Applies To: Agilent 6100 and 6400 Series LC/MS Systems
Issue
Tuning a mass spectrometer involves optimizing the voltages applied to various optical elements in the ion path to achieve the required mass accuracy, resolution, and...
This Information Applies To: Agilent OpenLab ChemStation
Issue
In OpenLab ChemStation, creating a result set by combining multiple existing result sets can be useful in the following scenarios:
Combining single samples, sequences, or a combination...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
The AriaMx analysis software shows an error when attempting to open a data file.
Background
The AriaMx analysis software can show several errors when something is wrong...