I'm using the GC6890 with one single column (CP7429). The gas products have to be analyzed by TCD and FID simutaneously. How should I connect the column to TCD and FID? Is it necessary to have a s plitter to split effluent from a single column to TCD…
Lately, we are having major issues with Masshunter failing on injections. I put a table listing our operating systems and the masshunter versions installed. The error we are getting is : MSQQQ_1:Failed to write scan record to the data file . We are writing…
Hi shaneo did you solve the problem? I am having the same issue now and I am wondering if you could solved it and can help me what you did. Thanks in advance.
Situation: When launching an installation of OpenLab Chemstation C.01.07, the 'Connection to selected server failed' error appeared. Agilent OpenLab Shared Services service was not started, and attempting to manually start the service yielded the following…
I recently had this issue, even with methods that had worked previously. It became apparent that this was happening at a particular temperature and once that temperature was reached, the inlet would shutdown and the error would pop-up. It became apparent…
I got a rare error after re-installing MassHunter Acquisition B 06.01. This error made all my Acquisition analysis methods unable to read. Note: The reason why I re-installed MassHunter Acquisition B06.01 was the software was doing some wired things;…
If cartridge does not eject after assay has completed, this document can be used to help troubleshoot. Here is a list of the most common causes for this error: User improperly loaded cartridge/cell plate User loaded two cartridges into instrument at once…
Hi, I have an old Agilent 1120 compact system running on a computer with ChemStation B. 04.03, last week the computer failed and never got back, I reinstalled the ChemStation software using the Disk provided at the time of purchase, but don't have the…
To be honest, you use Mustang to process a FID data? is odd, but here is something that I switching back and forth between Enhensed DA and EPA Quant, First you need to have the command line on, type Enhanced 1 and press Execute to go to EPA, and Enhanced…
This Information Applies To: Agilent 6820, 6890, 7820A GC systems with a Split/Splitless (SSL) inlet
Issue
Non-volatile sample matrix components will accumulate in the inlet liner and impact on analytical performance. The inlet liner should be changed...
This Information Applies To: Agilent headspace samplers (HS)
Issue
GC cycle time needs to be calculated correctly. Too short a GC cycle time will reduce sample quality and possibly stop the analysis prematurely. Too long GC cycle time can cause...
This Information Applies To: Agilent 7820A GC
Issue
7820A GC is designed with simplified keypad that comes with five buttons. They are Stop, Prep Run , Start, Up and Down arrow buttons. Changing the IP address requires a different method compared...
This Information Applies To: Agilent Single Needle Autosamplers
Background
Sometimes the user may observe liquid flowing from Port four on the autosampler injection valve. During an injection sequence, it is normal to have liquid from port four...
This Information Applies To: Agilent 4200, 4150, 2200 TapeStation systems
Issue
Can I run an assay using the ladder or sample buffer from a different assay if I have run out of the appropriate assay ladder or sample buffer? Is it possible to run...
This Information Applies To: Agilent ICP-MS 7700, 7800, 7850, 7900, 8800, and 8900 systems
Issue
Peristaltic pump tubing that has lost its elasticity will not deliver the sample to the nebulizer correctly. When the pump tubing appears limp or flattened...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
AriaMx touch screen displays error code 90 after the Instrument Health Check (IHC), which happens when the AriaMx is switched on, or after running the onboard diagnostic tests...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx optical modules
Issue
AriaMx users can change which AriaMx optical modules are installed to upgrade the instrument capabilities or to troubleshoot.
Items Required
Any...
This Information Applies To: AriaMx real-time PCR system
Issue
Error 43 is displayed on the AriaMx touch screen. Error 43 is a voltage error and it normally indicates that the cartridge LED voltage or motor voltage being detected is abnormal. Sometimes...
This Information Applies To: Agilent 2100 Bioanalyzer system
Issue
Can I run qPCR samples containing Sybr® Green I on the Bioanalyzer?
Background
Sybr® Green I is an Intercalating Dye commonly used to detect amplification products in real...