This is a discussion with Rob Dejong, Agilent's Micro GC Product Manager. We discuss hydrogen energy and how the Micro GC can be used to analyze hydrogen fuel blended with natural gas. Hydrogen energy is an exciting topic as it is a big part of the green…
Hi aline.castilla-vitkovsky
Better to create the methods in the 8890 from the default method, (default.m).
If the version of the software are different you may have problems with it.
Thanks
Regards
Support and educational resources for VWorks Automation Control Software for Liquid Handling including VWorks Standard and VWorks Plus (compliance-enabled).
Support Documents
Automation Solutions Help and Learning
Automation Software and Devices…
Hello,
Agilent stopped supporting Galaxie in 2014 so we no longer provide the software. Attached was the note announcing the discontinuation. OpenLan CDS 2.x can support certain versions of the 490 GC. You might also have options with OpenLab EZChrom…
Hi Chelsea!
That column was hidden. I didn't even know there were more columns available there and, sure enough, the "Level 1" was missing. Not sure what happened to it, but that's an easy fix.
Thank you for your help!
Jacob,
I am new to chemstation software and trying to learn it. I am having the same problem using the same method. I am testing hemp. Did you figure out why you were getting incorrect potency? Also, are you using (Multipliers = 20, 20. Dilution factors…
It is less volatile, but should work from your aqueous medium. Incubation temperature 80-90 °C, incubation time 10-20 minutes. With a SPME PDMS fiber (10%) you could even improve it more.
Hi Nadjan, I have some good news . I ordered a drain management kit G4267-68708. I replace the only washport in G7167A, and it successfully completed the autoreferencing. You were right, it is all due to washport, I did not change the whole drain kit…
This Information Applies To: AriaMx real-time qPCR system
Issue
The instrument fails to reach the required temperature during a run.
Resolution
Check if the temperature of the environment around the instrument is too low resulting in the instrument...
This Information Applies To : Agilent ELSDs G4260A, G4260B, G4261A, G4621B, G7102A, G7102B
Content :
If the evaporator tube of ELSD becomes contaminated with nonvolatile material resulting in poor chromatography, please use the procedure in this...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
The oil should be replaced at least once every six months, or when the oil color is indicates it needs to be changed . The foreline pump should be checked monthly. This article...
This Information Applies To: Agilent ICP-MS MassHunter versions 4.4 - 4.6 and 5.x.
Issue
After performing an autotune, the batch tune report will not generate or print.
Background
ICP-MS MassHunter uses an application called ICP-MS Data Analysis...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve
Issue
Installing the Ion Transfer Capillary after cleaning or replacement in Agilent LC/MS instruments with a gate valve.
Required Items...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify uncalibrated compounds in OpenLab CDS 2.x. using reference compounds in the processing method compound table.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify the uncalibrated compounds in OpenLab CDS 2.x when the analytical method requires a fixed response factor.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
When your Agilent OpenLab ChemStation Edition software fails to launch with errors " Login failed with the following message: Configuration system failed to...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
Agilent OpenLab ChemStation Edition software fails to launch with error containing the words " Autostart Macro failed ”. This article will provide you some...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer and Oligo Pro II instruments, and their respective controller software.
Issue Failed to build pressure error comes up shortly after starting a separation...