I get a bunch of junk on the front panel of the GC and the detectors I have (PID and FID) end up going cold. It is a bunch of work to re-calibrate due to software stuff we have to do for the method we are running. Plus the 1/2 hr runs I do take a while…
Hi everyone,
We have detected fails in 3 FLD modules installed in the same instrument.
The fist of these gave the error 06712 (emission motor did not find position),and was replaced with a second module. This when it was being installed failed again…
Hi All.
I've installed many time Openlab from version 2.0 to 2.5 but this is the first time I get this error on a new computer that IT gave us.
Trying to install Openlab 2.5 Workstation on Win10.
It fails at the "Openlab Chemstation Access" step…
Hi Azrael, Publication Part Number: A02028 might be one of several apps to look at. if you could elaborate which targets are nice but not required for quantitation? It appears that Argon is the carrier and sample prep diluent gas then, though He/H2 are…
I have been operating an 7890A/5975C with Chemstation version E.02.00.493 for a couple of years. The autosampler is a Gerstel MPS2 (model MXY-02-00B) controlled by Maestro version 1.10[017] and the GC has an FID in the front detector position. I have…
Hello, I have a TCD + FID GC 6890. Need to upgrade to Windows 10, because Windows will no longer provide security updates for Windows 7. Is Chemstation B.04.03 compatible with windows 10? Alternatively, will A.10.02 be compatible with GC6890? Thanks for…
Hello, SW: MassHunter Workstation, Quantitative Analysis, Drug Analysis for GC, Version 10.1 Build 10.1.733.0 I am trying to batch process data acquired by GC-FID but I unable to generate the correct sample result since I don't know where to enter the…
Hi All,
For the last 1.5 years, the pump has been running fine even though the rear seal wash was blocked. Then in September, we were having issues with our pumps and found there was leaking in pump B. We did a maintenance, meaning cleaning the pumps…
Hello,
we want to analyse a gas mixture (CO2, CO, propane, ethane and methane in hydrogen) with the HP 6890 Series GC System (G1540A). The gases are coming to the column via a six-way valve and after the column, there is a TCD and a FID detector. In…
I have configured my laptop to our 8890 GC with a split/splitless inlet and FID. I am currently just doing manual injection. When sending the method from my laptop to the instrument, all of the parameters reach the setpoints except for my column temperature…
How to Create a New Database in Spectroscopy Database Administrator (SDA)
Multiple Results
This Information Applies To: Spectroscopy Database Administrator (SDA)
Issue
If the old database is full, or after a specific time interval, it is necessary to create a database in SDA. If you receive a message telling you that the database is full...
Update Database Group Path in Spectroscopy Configuration Manager (SCM)
Multiple Results
This Information Applies To: Agilent Spectroscopy Configuration Manager (SCM)
Issue
It is necessary to add a database to a group path in SCM after creating a new database in Spectroscopy Database Administrator (SDA) . If access to an older database...
How to Access Spectroscopy Database Administrator Software (SDA)
Multiple Results
This Information Applies To: Agilent Spectroscopy Database Administrator Software
Issue
The SDA application can only be accessed by a Windows user who is a member of the Windows Administrators group and Windows SDAAdministrators group.
Steps...
This Information Applies To: AriaMx real-time qPCR system
Issue
The instrument fails to reach the required temperature during a run.
Resolution
Check if the temperature of the environment around the instrument is too low resulting in the instrument...
This Information Applies To : Agilent ELSDs G4260A, G4260B, G4261A, G4621B, G7102A, G7102B
Content :
If the evaporator tube of ELSD becomes contaminated with nonvolatile material resulting in poor chromatography, please use the procedure in this...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
The oil should be replaced at least once every six months, or when the oil color is indicates it needs to be changed . The foreline pump should be checked monthly. This article...
This Information Applies To: Agilent ICP-MS MassHunter versions 4.4 - 4.6 and 5.x.
Issue
After performing an autotune, the batch tune report will not generate or print.
Background
ICP-MS MassHunter uses an application called ICP-MS Data Analysis...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve
Issue
Installing the Ion Transfer Capillary after cleaning or replacement in Agilent LC/MS instruments with a gate valve.
Required Items...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify uncalibrated compounds in OpenLab CDS 2.x. using reference compounds in the processing method compound table.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify the uncalibrated compounds in OpenLab CDS 2.x when the analytical method requires a fixed response factor.
Background
Uncalibrated...