I'll just guess because you gave us very little information in my opinion.
But...It seems m/z 208 is shifted to more cc than it should. Maybe an interference with that m/z?
The 66x2mL tray has three white square plastic clips on its rear for automated identification by the sampler.
The 18x6mL tray just has one of the squares.
Please check your tray, i am pretty sure that some of these clips are missing.
You may will…
Okay, I just remembered - I didn't manage to change the size of the text in this program, it was in the Qualitative analysis program. So perhaps it is not possible to change the text size in this program. I really wish that feature would be added, for…
Hello Chalbrecht ,
I apologize for the delayed response.
There are a few options for naming the reporting output file using the sample or batch name with $(SampleName) and $(BatchFileName), but I don't see that the Sample Group is an option. You may…
Hello Achim_Hongenaert ,
I apologize for the delayed response.
There are a few outliers that can be used for recovery calculations. If this compound is added to all samples then I believe the best option will be to call it a Surrogate in quant, even…
Thank you, Linh, for your information. Given that it is an old machine, I am concerned about the potential loss of data if we upgrade the software. Instead, I will create a shutdown method to be executed at the end of the sequence run.
Hello,
I would like to ask if it is possible to execute the command "Created Compound from Each Selected Spectrum" in version B.10.0 of the Agilent MassHunter Qualitative Analysis software. This command is available in version B.07.00, but not in version…
Did you remove the diffusion pump, take it apart, empty the contents completely, wash them all with something like toluene, reassemble it with new diffusion pump fluid filled only to the top of the "cold" mark - if you didn't take it all apart and any…
Hello. Thank you howard_sanford for that answer! I talked to an Agilent technical representative and he came up with the same solution. But, we have the B.07.06.2704 version of Masshunter. What would be the data path for those files in that case? I am…
This Information Applies To: Agilent ICP Expert software.
Issue
The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc.
Steps to Follow
Launch ICP Expert...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to calculate peak-to-valley ratio in OpenLab CDS.
Background
The peak-to-valley ratio is calculated to indicate the quality of peak separation...
This Information Applies To: Agilent 6500 Series Q-TOF LC/MS systems, MassHunter Workstation 10.1 or below and MassHunter Workstation 11.0 .
Issue
Fully reset the Q-TOF LC/MS system via a power cycle without venting. For users who experience slow...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, and Oligo Pro II systems
Issue
The volume of sample used by Agilent parallel capillary electrophoresis systems during a run.
Resolution
The...
This Information Applies To: Agilent 2100 Expert software, 2100 Expert Security Pack, 2100 Bioanalyzer
Issue
When opening the 2100 Expert software and using the Security Pack, the error message " Start of launcher application failed - The requested...
This Information Applies To: Agilent 6890, 6850, 7890, 8890, 8860, Intuvo 9000 GC systems.
Issue
The exchange of the ignitor in a Flame Photometric Detector (FPD) may be required in the following scenarios:
Preventive or periodic maintenance...
This Information Applies To: Agilent 1290 Infinity Quaternary Pump G4204A, 1290 Infinity II Flexible Pumps G7104A/C, and G7131A/C.
Issue
If the flexible/quaternary pump does not generate flow or build up pressure, it could be due to a stuck inlet...
This Information Applies To: Agilent 5200, 5300 and 5400 Fragment Analyzer systems
Issue
Separation times for the Fragment Analyzer for each array format and kit.
Resolution
Caution : The times in this article are the length of time...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, Oligo Pro II, ProteoAnalyzer systems
Issue
Guidance for installing the Agilent parallel capillary electrophoresis instrument controller and/or...
This Information Applies To: OpenLab CDS (version 2.x) system
Issue:
This article explains how to export OpenLab CDS 2.x data as Archived file.
For copying OpenLab CDS 2.x data to another Projects or another OpenLab CDS systems, you can use data...