• Created : 
  • Modified : 
  • Category :  Agilent Knowledge Portal
  • Entry Type :  Article
  • Product Type :  ICP-OES Software
  • Component :  ICP-Expert Software
  • Product Name :  ICP Expert software PRO ICP Expert software base
  • Task :  Administration Operation Site Preparation
Related Articles

  • How to Upgrade ICP Expert version 7.5

    This Information Applies To: 5000 series ICP-OES (5100/5110/5800/5900) ICP Expert version 7.5 Issue How to install an upgrade version of ICP Expert via USB to current ICP Expert (i.e. 7.5.2 upgraded to 7.5.3) Resolution To upgrade the current version of software to the new version of software, please have your current ICP Expert Software closed and log onto the computer with Administrator privileges. 1. Insert the ICP Expert software USB in the PC 2. If AutoPlay prompts to Run ICPExpertSetup...

  • How to Set up Communication Between Agilent 5000 Series ICP-OES Instruments and Agilent ICP Expert Software

    This Information Applies To: Agilent 5000 ICP-OES Series and Agilent ICP Expert Software Issue How to connect Agilent 5000 series ICP-OES systems to Agilent ICP Expert software via LAN Steps to Follow How to connect Agilent 5000 series ICP-OES instruments to Agilent ICP-Expert software using the standard configuration of a static IP address The Agilent 5000 series ICP-OES uses a LAN communication between the computer and instrument. Caution : Any changes to default network...

  • Set up an ICP-OES Worksheet with Internal Standard while Bypassing the AVS

    This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7, ICP Expert version 7.X Issue The AVS can contribute to instrument performance issues such as sensitivity and precision. During troubleshooting, bypassing (or skipping) the AVS and running a worksheet during can identify if the AVS is the root cause of the issue. Other root causes could be the method application, or an instrument fault. Items Required If an internal standard line is required, install the...

  • Adding Custom Columns in ICP Expert

    This information applies to: Agilent ICP expert 7.x software for the 5800/5900 ICP-OES and 5110/5100 ICP-OES systems. Issue Add a custom column to a report in ICP expert 7. Steps to follow In ICP Expert , open a worksheet that already has data collected. On the Analysis tab, right-click within the results table and from the context menu, select Add Custom Column ( Figure 1 ). Figure 1. Adding Custom Column option Provide the custom column a name, and enter the equation of choice...

  • How to Reset the AVS 6/7 on Agilent ICP-OES Instruments

    This Information Applies To: 5000 series ICP-OES (5100/5110/5800/5900), ICP Expert Issue How to Reset the AVS 6/7 after maintenance or when a red LED is visible Steps to follow Tips : Instructions for changing the AVS switching valve can be found in the ICP Expert Help under “Hardware How to” and “Replace the AVS 4/6/7 Tubing”. Figure 1. ICP Expert Help After replacing the AVS valve and tubing, a red LED is showing on the AVS plate. Figure 2 shows the location...

How to Check my Agilent ICP Expert Software Version?

Answer

This Information Applies To: Agilent ICP Expert software.

Issue

The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc. 

Steps to Follow

 

  1. Launch ICP Expert software from the Windows menu Agilent > ICP Expert or by clicking the desktop icon.



    Figure 1: ICP Expert software desktop icon

  2.  After ICP Expert software starts, on the top-right of the screen, click the pull-down menu next the Help button. Click About ICP Expert…



    Figure 2:      ICP Expert software About tab

  3. Software version is presented on the dialog box. 



    Figure 3: ICP Expert Software about window

 
Learn how to effectively operate your Agilent ICP-OES system:
Agilent 5000 series ICP-OES with ICP-Expert e-learning course available from Agilent education

 

Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help