Hi emilymorin ,
I'm glad you found a solution that works for your data sets. I have continued to investigate this issue, but your solution does not work for all of the data sets I have tested with. I suspect disabling the save file feature may work…
Hope your week is going well, can wait for spring to actually arrive.
When we turn auto offset on for either of our GCs, it ramps the output so high that it shuts down. This is just for the nitrogen phosphorus detector. We normally turn it off, but…
Thanks! To add, I just ran the software verification tool and the MassHunter GCMSAcq_base.xml report failed. File Report Summary
Missing files or invalid files found:
Invalid Files :1
No system file difference found
Invalid Files …
Hi mubashirraza, PCBs are not commonly sampled via headspace. SPE is more commonly used as a cleanup step followed by standard auto-sampler injection. PCBs are more often detected using MS or uECD due to their more selective operation. I've attached some…
Hi there! We have a Cary 60. We are doing preventive maintenance, but the noise test fails and it took up to three or four times to get a successful result. What can we do to improve this and get a passed result the first time?
We have several 1220 Infinity II system (G4290B) on our location. They are connected same type of computers with same windows. Only one of them has connection issue as below. Since there is connection to detector (I can control detector fully), I am not…
As per my knowledge after changing any component in GC (FID assembly,Injector liner parts,Column) the instrument need to be kept for conditioning about minimum of one hour other wise as you did three to four blank injections has to run. Due to the temperature…
When running a calibration on the GCMS the internal standard increases the entire time for all of our standards. It goes from around 1.9 million for the bottom of the calibration to 3.2 million. Recent things that we have done that should help eliminate…
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...