The Digest of upcoming webinars has been updated as of March 7.
Notable additions include:
Atomic (1)
Automated Electrophoresis (1)
Chromatography and Mass Spec (12)
Vacuum Solutions Series (3)
Check Out:
The Analysis of Petroleum…
Iron(II)fumarate is a salt with a melting point of 280 °C and therefore not suitable for gas chromatographic analysis. You need to remove the metal ion and set the fumaric acid free, get the sample dry to derivatize it with BSTFA or do an esterification…
Hello,
The infinity II is the HPLC hardware, that can be controlled by several different Agilent software platforms CDS 2.x, Chemstation, EZChrom plus third party data systems. In most of the Agilent software, if you can find the help menus, there…
Hello,
You cannot change the presentation of that results preview screen directly in Chemstation. You might be able to change the behavior using macros, but no configuration is available by default.
Marty
Hello,
Based on the ladder profile in the screenshot you shared, it appears that you are running the DNF-905 kit.
In reference to the issue of missing sample signal or blank lanes, since ladder and marker peaks are present as expected, issue is likely…
K_Ruiter The error you are experiencing could be related to the ESW/FW version used on the Ultivo (I would assume you are using ESW 6.74.3). If you are willing to upgrade acquisition software to the latest (MH 12.1), the new ESW/FW for the TQ may resolve…
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...