Hello AGILENT family,
i have a few questions on the analysis of Pb in blood samples.
am failing to get the right concentrations of the QC sample 8ppb instead it’s reading 0.08 ppb and at the same time it’s also showing overange (0.08o) even when my…
I am a user of an Agilent 7900 ICP-MS. It has been working fine since last month, but today (Oct 13, 2022) the software was not able to connect to the instrument. When I try to connect the MassHunter software to the ICPMS by going to settings > mainframe…
Thanks for the answer but I still fail to understand.
If helium pressure at the inlet of the TD is constant and only controlled manually, why can't it be controlled by the AUX EPC?
Can't I just connect one of the outlet of the AUX EPC through a t…
We fail to properly communicate with the turbo V70 controller, model 969-9507, using RS232.
The communication is ok for all commands that do not answer with more than two bytes, like start and stop.
However, commands supposed to answer with more than…
We have a GC-MS instrument and it works well. Recently we installed a new column which connected to FID detector. Now we want to run a method with GC-FID/MS. However, we observed the peaks only in MS spectrum without FID spectrum. We need help with the…
This document contains a list of FAQ and troubleshooting links for Agilent Cell Analysis products. See also Collection of Cell Analysis Resources .
FAQs
Seahorse:
Agilent Seahorse XF Imaging and Normalization FAQs
Agilent Seahorse XF Real…
Hi Everyone
This is my first post here in this community. And I really hope to get some ideas to fix my problem, since i'm getting slowly desperate!
So here's my problem: We have some really bad contamination/peaks on all our polar Systems:
I…
Hi community
we getting error message (Configuration system failed to initialize. Chemstation will shutdown now) when we trying to launch Chemstation ,we try rename conf. files in C:\Chem32\1 but that not work.
I appreciated any help .
Dheya
Hi,
I get this Front Inlet: Septum purge Pre shutdown warning with Error code: 20401202 with cause showing EPC module is going into a shutdown. This warning showed up immediately after the maintenance was performed to change the septum and SSL liner…
This Information Applies To: MassHunter qualitative analysis software version B.02.xx and above.
Content
The procedure introduces how to calculate and display the peak resolution for GC signals with MassHunter qualitative analysis software.
...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
The default MassHunter batch analysis reports a calculated concentration of analyte in the sample extract. The software has the capacity to apply a multiplier to...
This Information Applies To: GC/MS Acquisition Software
Issue
This article explains the login options and the default password (if available) for different versions of the Agilent GC/MS Acquisition software.
Steps to follow
For the GC/MS MassHunter...
How To Configure a New GC/MSD with the Agilent GC/MS Configuration Editor
Multiple Results
This Information Applies To: Agilent GC/MS MassHunter Acquisition Software
Issue
The GC/MS Configuration Editor can be useful when troubleshooting GC/MS MassHunter Acquisition software.
It may be useful when troubleshooting some types of software...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
When creating a MassHunter Quantitative Analysis Batch with many samples, several sets of calibration standards may be included. If your protocol requires the use...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
When creating MassHunter Quantitative Analysis methods for a large list of compounds, it is often most practical to work with subsets of the entire compound list...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software Classic mode, and Agilent MassHunter Quantitative Analysis Software Quant-My-Way mode (Rev. B.09.00 and above)
Issue
In the MassHunter quantitative analysis, you should...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
MassHunter Quantitative Analysis allows limits to be set on many result values, and for results outside these limits (outliers) to be flagged in the batch report...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
The following procedure is to learn how to use the tools in the Compound Information window to view chromatograms and spectra for your data.
Steps to follow...
This Information Applies To: Agilent MassHunter Quantitative Analysis Software
Issue
Batch Table can be configured with many different data columns. This article uses an existing demonstration batch with method and analyzed data files to view different...