A compilation of our favorite resources to help you get started with your new GC or GC/MS System:
Free Agilent Education courses are available to guide you through site preparation of GC systems including systems with a Mass Spectrometer, Headspace…
Here's what's new in the latest release of StreamSelect software:
Add support for LC/TQ instruments: Ultivo, 6475A, and 6495D
Add support for PAL3 Series II injector
Add support for license management
Licensing enables sales tracking and to…
5181-1267 - plunger tip material - stainless steel. I'd switch to a PTFE tipped plunger like 5181-3354 . Using water as the last rinse may be the culprit. I've known of this problem happening on Monday after a syringe sits after just water in it from…
What acquisition software are you running? I'm not able to locate that specific error message in the help in MSD Chemstation E.02.02 SP2 nor MassHunter...
A simple troubleshooting step is to remove the syringe and try it.
Hello,
Do you see any errors in the sequence log during the reprocessing? What happens if you process with a new method, can you update the RTs in a new clean method?
Marty
Agilent offers the ADM Flow Meter (G6691A) with replaceable calibrated cartridges. The Flow Meter has a black-and-White digital display and works with acoustic displacement measurement.
The firmware can be updated by connecting the ADM Flow Meter to…
Hello, the small volume webinar at the below link has discussion of one implant using Apparatus 7.
Dissolution: FoundationBeyond (on24.com)
If you'd like to reach out to dissolution.hotline@agilent.com we can discuss further more specifically for…
If the RedCargo site is not available for you or has problems, you can get the ADM Flowmeter Certificate of Calibration Addendum here. The tool uses a print popup, so allow popups for this site.
Certificates of Calibration Addendum
…
This Information Applies To: HES ion source in 5977B/C GC/MSD, 7010 triple quadrupole GC/MS systems
Issue
The filaments are replaced as part of routine maintenance, or when they break (zero output current).
Items Required
Gloves, nylon,...
This Information Applies To: Agilent 5977A/B/C GC/MSD
Issue
The Electron Multiplier Horn must be replaced when it is contaminated or the EMV value reaches 3000 V with a clean ion source.
Items Required
Electron multiplier horn (5977B/C:...
This Information Applies To: Agilent 5973/ 5975/5977 GC/MSD with rotary vane foreline pump
Issue:
The oil mist filter is recommended to be replaced annually. If the color of the filter has changed or there is smell from the filter, the oil mist...
This Information Applies To: Agilent EI Source
Issue:
During normal operation of the GC/MS, the EI SST/Inert ion source will need to be disassembled to proceed with abrasive ion source cleaning and / or routine replacement of consumable parts (filaments...
This Information Applies To: Agilent G7129A/B/C Vialsampler
Issue:
Replacing the needle and needle seat of the Vialsampler is required when:
The needle is visibly damaged.
Leaks or blockages in the vialsampler are observed, especially between...
This Information Applies To: Agilent G1311A/B/C, G7111A/B, Quaternary Pumps, and G1310A/B, G7110B Isocratic Pumps, G1312A/B/C, G7112B Binary Pumps
Issue:
How to diagnose no flow or no pressure issues on binary, quaternary, or isocratic pumps.
...
This Information Applies To: Agilent UV and RID detectors
Issue
A clogged flow cell causes high backpressure. The clog can be removed by flushing the system with solvents at high pressure. If you suspect a clog or experience high backpressure due...
This Information Applies To: Agilent G1312X and G7112X binary pumps.
Issue:
A blockage before the pressure sensor, e.g. in a pump head, will not give a high pressure or overpressure system error. Instead, the pump may show one of various error messages...
This Information Applies To: Agilent 1100, 1200, 1260 LC Pumps.
Issue:
The following procedure allows the cleaning of residue from the pump's check valves, often caused by polymerization of aged acetonitrile or salt-based solutions that may prevent...
This Information Applies To: Agilent LC Systems
Issue
After analyzing dirty or concentrated samples, some sample compounds may retain in the column and other parts of the HPLC system. If the column re-equilibration after each run is not enough to...