Thank you for all your suggestions, this is what I have done so far, With computer disconnected from our Network (to eliminate firewall issues, as per recommended by or IS/IT department): Both instruments connected through hub - failed Only 6850 connected…
Hi, Thanks a lot for your great help. However, how to use "Import worklist" function to import entries into the user defined " Amt. and Tot. Amt. " column? Other info are import succesfully except the two ones. I tired " Amt.","Tot. Amt. " in the importing…
Thanks for your help!
Here is the method:
/cfs-file/__key/communityserver-discussions-components-files/147/0878.acqmeth.txt
This is the scan chromatogram focusing on MMA in the SIM region. I performed another injection of 0.8 uL MMA to help identify…
Thank you for your help, Paul. I'm not sure what happened on October 27. Many people use this system.
This morning, the system passed the Tune Evaluation, but the HiVac is still off. I looked at the Manual Tune task box, but do not see where I have…
I am not able to connect to the instrument using Lab Advisor because the instrument is connected to OpenLab. We should be able to disconnect using "Close Connection" from the OpenLab Control Panel, but it gives the following error when I try:
Agilent…
When I want to save or export a worksheet, does the software give me the option where to save it? When you save a worksheet, it always saves to the database. It will appear on the home page within Mercury. When you “export” either the data as .csv (via…
Hello, everyone! I see a similar thread with masshunter , but not chemstation. Do I need a macro to do the job with retention indices? Are such macros available for download? I'd like to identify some VOC by indices in an n-alkanes scale in a hardware…
We have three Sulfur SCDs, two of which have inordinately high signal outputs:
1) Agilent 355; Model #G6644A; SN #CN11411006; PMT #DC7303; with FID on HP 5890 Series B
2) Sievers 355; Model SCD355; SN #0500-918; PMT #WB5942; with FID on HP 5890 Series…
The 6850 & 6890 LAN adapters are very often configured to respond to a "BOOTP" server program running on the network they are wired to.
So upon powerdown the GC loses its previously assigned IP address, and later upon powerup the GC sends a request…
Dear Royboyle, Thank you for you email, i am still having issue with peak purity at 50% sensitivity the peak purity of standard is failing and when i change the sensitivity to 40% then it passes, i am bit confused now what is the standard guideline regarding…
This Information Applies To: Agilent OpenLab CDS
Issue
Reports in OpenLab CDS can be printed or saved manually in Data Analysys, or automatically during reprocessing, or acquisition.
Requirements
The user needs the following Roles and Privileges...
This Information Applies To: Agilent 5975 and 5977 Series GC/MSD systems.
Issue
During tuning, MassHunter prompted the error message: "MSD Fault- RFPA Difficulty", and tune action stopped.
Steps to Follow
Try to reconfigure the GC/MS....
This Information Applies To: Agilent OpenLab CSD 2.5 and above
Issue
The integration optimizer helps find a suitable set of integration events. It allows integration parameters to be tuned via sliders (peak width, slope sensitivity, height reject...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The Agilent 2100 Bioanalyzer system run ends prematurely and the following error appears in the logbook: Run aborted on port x. Instrument error occurred on port x, Unusual...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue
The Agilent 2100 Bioanalyzer system electropherograms in the Agilent 2100 Expert software have a wavy, uneven baseline ( Figure 1 ).
Figure 1. Wavy, uneven baseline on Bioanalyzer...
This Information Applies To: Agilent AriaMx systems.
Issue
When IP addresses of an AriaMx instrument are reassigned, it will appear under the new and the previous IP address in the AriaMx Instrument Explorer. This situation can be prevented using...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
Sometimes, for support purposes, it is necessary to send the diagnostic test result file to Agilent support representatives.
This file contains detailed information about the...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx Real-Time PCR software
Issue
How to change the discovery protocol port in the AriaMx software.
Steps to Follow
The AriaMx software uses the UDP Broadcast protocol for...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
The instrument diagnostic tests should be run whenever it is suspected that there could be a fault with the instrument hardware.
Background
The instrument diagnostics consist...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
Error 45 is displayed on the AriaMx instrument touch screen.
Background
Error 45 is shown when the temperature recorded by one or more thermistors is outside the expected...