Hi everyone! Please help me to fix the problem. I have been using Agilent 6470A.
What could be the reason for the error on the pics? MS1 and MS2 «RFPA functionality Failed». It appears everytime when I’m doing QQQ Power On Diagnostic.
I get a bunch of junk on the front panel of the GC and the detectors I have (PID and FID) end up going cold. It is a bunch of work to re-calibrate due to software stuff we have to do for the method we are running. Plus the 1/2 hr runs I do take a while…
Hi Azrael, Publication Part Number: A02028 might be one of several apps to look at. if you could elaborate which targets are nice but not required for quantitation? It appears that Argon is the carrier and sample prep diluent gas then, though He/H2 are…
Hi All.
I've installed many time Openlab from version 2.0 to 2.5 but this is the first time I get this error on a new computer that IT gave us.
Trying to install Openlab 2.5 Workstation on Win10.
It fails at the "Openlab Chemstation Access" step…
Hello, SW: MassHunter Workstation, Quantitative Analysis, Drug Analysis for GC, Version 10.1 Build 10.1.733.0 I am trying to batch process data acquired by GC-FID but I unable to generate the correct sample result since I don't know where to enter the…
Hello, I have a TCD + FID GC 6890. Need to upgrade to Windows 10, because Windows will no longer provide security updates for Windows 7. Is Chemstation B.04.03 compatible with windows 10? Alternatively, will A.10.02 be compatible with GC6890? Thanks for…
Hi everyone,
We have detected fails in 3 FLD modules installed in the same instrument.
The fist of these gave the error 06712 (emission motor did not find position),and was replaced with a second module. This when it was being installed failed again…
I have been operating an 7890A/5975C with Chemstation version E.02.00.493 for a couple of years. The autosampler is a Gerstel MPS2 (model MXY-02-00B) controlled by Maestro version 1.10[017] and the GC has an FID in the front detector position. I have…
Hi All,
For the last 1.5 years, the pump has been running fine even though the rear seal wash was blocked. Then in September, we were having issues with our pumps and found there was leaking in pump B. We did a maintenance, meaning cleaning the pumps…
I have configured my laptop to our 8890 GC with a split/splitless inlet and FID. I am currently just doing manual injection. When sending the method from my laptop to the instrument, all of the parameters reach the setpoints except for my column temperature…
This Information Applies To: Agilent AriaMx, Software version 1.8 and later
Issue
The Aria Warm up Feature was introduced with Aria SW/FW 1.8 to reduce baseline drift. The warm-up feature is used to speed up the heating process that would normally...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
When a sample name starts with zero, the leading zero disappears from the exported data ( Figure 1 and Figure 2 ).
Background
Removing the leading...
This Information Applies To: Agilent 7890B GC system and 7697A headspace sampler
Issue
The 7697 Headspace Sampler can be configured to communicate directly with the 7890B GC. When this direct communication is configured, the 7697A headspace gets...
This Information Applies To: Agilent GC/MSD systems
Issue:
When performing MS tuning, there is error message "No Emission Current" and tune is aborted.
Steps to Follow
This error normally means that the selected filament is not working. Perform...
This Information Applies To: Agilent OpenLab CDS
Issue
Any desired processing method can be assigned to the current Result Set.
Requirements
A result set available to link the method to.
Correct Privilege (Role Membership) set up for the...
This Information Applies To: Agilent LC and CE Systems compatible with Lab Advisor
Issue:
Firmware is updated or downgraded when new features are added, or to fix some system bugs. It also solves compatibility issues when a new module is added to...
This Information Applies To: Agilent OpenLab CDS
Issue
This article shows how to export a report of peak area and retention time of a sequence in an Excel format.
Prerequisites
To be able to carry out the procedure as described, privileges...
This Information Applies To: Agilent OpenLab CDS
Issue
Reports in OpenLab CDS can be printed or saved manually in Data Analysys, or automatically during reprocessing, or acquisition.
Requirements
The user needs the following Roles and Privileges...
This Information Applies To: Agilent 5975 and 5977 Series GC/MSD systems.
Issue
During tuning, MassHunter prompted the error message: "MSD Fault- RFPA Difficulty", and tune action stopped.
Steps to Follow
Try to reconfigure the GC/MS....
This Information Applies To: Agilent OpenLab CSD 2.5 and above
Issue
The integration optimizer helps find a suitable set of integration events. It allows integration parameters to be tuned via sliders (peak width, slope sensitivity, height reject...