I have a 6890N GC-FID with a 7683 Series ALS and I'm using Agilent Open Lab (EZChrom Edition) software. The software won't trigger the autosampler to make an injection. A box appears on the screen with the message 'Incompatible Tray'. I have verified…
Hi, We observed an error during autotune of QQQ GCMS as "Peak width gain failed", When it was occurred and what is the reason for the repeat error, Autotune was not completed due to " Peak width gain failed". Please suggest the recommendations and possibility…
Hi Chris and Chelsea,
thanks for your detailed answeres. I tried the suggested fixes and so far did not managed to reestablish a connection between PC and ICP-MS also after resetting the IP address of the ICP-MS. The computer detects that there is a…
Hi, In Masshunter 10, for a 6470 QQQ is it possible to have your worklist display the time that each injection will start and finish, or failing that, the time/date that your worklist is due to complete. Thanks - John. ross
I am now using the HPLC infinity 1260 with the software Openlab (Version A.01.02), the software shows an EMF now as shown in the attached photo. I know EMF means Early Maintenance Feedback, but what should I do to deal with it. I tried to find some useful…
OK, first you need to increase your read time to at least 30 seconds, preferably 60 seconds. At 10 seconds, you are probably not seeing a peak for the 5ppb standard, which is why your calibration is failing (not linear). How low are you trying measure…
Would you like an easier way to find the consumables for your Application or Workflow? We have created Send-a-Lists that will load into the Favorites section of your Agilent.com account. You can add or delete items to customize it for your situation.…
Hi mazarakis, I do not see an advanced operation manual published as of yet. I have attached the 8890 Operation Manual in case this helps. Regards James
Hello all,
We are running a GC/MS 5977A/7890B in our lab. Last week, after cleaning and reinstalling our Extract EI source, the system pumped down normally, but the GC gave a "Thermal Shutdown" message. Under status, it read "Thermal Aux 2 Open Sensor…
I have an Agilent 5975C MSD and 7890A GC that I'm getting a failed PING test on. I've done the troubleshooting I can (reboot system in proper order, reboot PC). I can ping the main IP but the ones going to the instruments fail. Please advise. PC is running…
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
AriaMx touch screen displays error code 90 after the Instrument Health Check (IHC), which happens when the AriaMx is switched on, or after running the onboard diagnostic tests...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx optical modules
Issue
AriaMx users can change which AriaMx optical modules are installed to upgrade the instrument capabilities or to troubleshoot.
Items Required
Any...
This Information Applies To: AriaMx real-time PCR system
Issue
Error 43 is displayed on the AriaMx touch screen. Error 43 is a voltage error and it normally indicates that the cartridge LED voltage or motor voltage being detected is abnormal. Sometimes...
This Information Applies To: Agilent 2100 Bioanalyzer system
Issue
Can I run qPCR samples containing Sybr® Green I on the Bioanalyzer?
Background
Sybr® Green I is an Intercalating Dye commonly used to detect amplification products in real...
This Information Applies To: Agilent 4200, 4150 and 2200 TapeStation.
Issue
Is it possible to analyze single stranded DNA (ssDNA) on the TapeStation? Which kit is the most suitable for analysis of ssDNA?
Resolution
Agilent does not offer any...
This Information Applies To: Agilent 4200 and 4150 TapeStation systems
Issue
How to Run the software installation verification on 4200 and 4150 TapeStation systems.
Background
The 4150 TapeStation model G2992A and 4200 TapeStation model G2991B...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, and Femto Pulse
Issue
Perform a capillary alignment when a new array is installed in your Agilent Parallel Capillary Electrophoresis instrument. An alignment may also be performed...
This Information Applies To: Agilent 4200 and 4150 TapeStation
Issue
Are the Agilent DNA and RNA ScreenTape assays denaturing?
Resolution
The DNA ScreenTape assays in the TapeStation portfolio are not denaturing. Only the RNA and High Sensitivity...
This Information Applies To: Agilent LC pumps with manual purge valve.
Issue
A good practice before using a system is to purge the system to remove air. This is done by observing the clear tubing from the solvent bottle as well as the waste line...
This Information Applies To: ICP-MS MassHunter 4.x and 5.x
Issue
Unable to open a batch in offline data analysis, or the batch is empty.
If the ICP-MS MassHunter software closes unexpectedly, there is a power outage, or the ICP-MS and computer...