Hi Biyi ! Is it that the QTOF appears online the Agilent MassHunter Workstation Data Acquisition software? When I power cycle my 6545 XT Q-TOF, I push the power button the Q-TOF and wait maybe 30 seconds. We try not to go more than a minute of being off…
Hi friends!
For starters, here is information about my equipment:
Instrument
Model
1290 Multisampler
G7167B
1290 High Speed Pump
G7120A
1290 Column Compartment
G7116B
6545 XT LC/Q-TOF
G6549A
Reagents…
When attempting to submit a sequence in EZChrom, it fails to submit and returns this error message:
This happens each time a sequence is submitted. Any help would be appreciated!
It seems that analysts have access to all method versions saved. Is there a way to Analysts them only have access to method versions that are approved?
Hello,
I'm about to replace the nitrogen tank that feeds the collision cell on our 6545 QTOF. I just have a simple question, can I change the nitrogen tank while the MS is in stand-by mode or does it need to be vented ?
This brings me to a second…
Hello Marty,
Thank you very much for your prompt and informative responce. I've viewed the video and immedeatly have made coressponding changes in my report template. This is exaclty what I was looking for. Now, I can use one template for different…
Hi LD,
You are very welcome! Our protocol recommends using 95% ethanol (do not use 100 % ethanol as it contains traces of benzene, which is detrimental to mitochondrial function) rather than DMSO. Also be sure not to add ethanol to the injection ports…
Hello strader.kh ,
If you are using Excel report templates you must generate the report.results.xml file to get a report.
If you are not using Excel templates you can disable the generation of this file in the Results tab of the Report Method Editor…
Hello,
What software and version are you using? I would assume it is OpenLab CDS 2.x, either workstation plus or a client server system. If you have one of these systems, it is possible to get orphaned IDs in the database, which can stop the system…
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer systems, RNA kit (15 nt) (p/n DNF-471-0500/1000), HS RNA kit (15 nt) (p/n DNF-472-0500/1000), Small RNA kit (p/n DNF-470-0275)
Issue
Which kit should be used to analyze single...
This Information Applies To: Agilent 6820, 6890, 7820A GC systems with a Split/Splitless (SSL) inlet
Issue
Non-volatile sample matrix components will accumulate in the inlet liner and impact on analytical performance. The inlet liner should be changed...
This Information Applies To: Agilent headspace samplers (HS)
Issue
GC cycle time needs to be calculated correctly. Too short a GC cycle time will reduce sample quality and possibly stop the analysis prematurely. Too long GC cycle time can cause...
This Information Applies To: Agilent 7820A GC
Issue
7820A GC is designed with simplified keypad that comes with five buttons. They are Stop, Prep Run , Start, Up and Down arrow buttons. Changing the IP address requires a different method compared...
This Information Applies To: Agilent Single Needle Autosamplers
Background
Sometimes the user may observe liquid flowing from Port four on the autosampler injection valve. During an injection sequence, it is normal to have liquid from port four...
This Information Applies To: Agilent 4200, 4150, 2200 TapeStation systems
Issue
Can I run an assay using the ladder or sample buffer from a different assay if I have run out of the appropriate assay ladder or sample buffer? Is it possible to run...
This Information Applies To: Agilent ICP-MS 7700, 7800, 7850, 7900, 8800, and 8900 systems
Issue
Peristaltic pump tubing that has lost its elasticity will not deliver the sample to the nebulizer correctly. When the pump tubing appears limp or flattened...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
AriaMx touch screen displays error code 90 after the Instrument Health Check (IHC), which happens when the AriaMx is switched on, or after running the onboard diagnostic tests...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx optical modules
Issue
AriaMx users can change which AriaMx optical modules are installed to upgrade the instrument capabilities or to troubleshoot.
Items Required
Any...
This Information Applies To: AriaMx real-time PCR system
Issue
Error 43 is displayed on the AriaMx touch screen. Error 43 is a voltage error and it normally indicates that the cartridge LED voltage or motor voltage being detected is abnormal. Sometimes...