My cary 5000 UV-VIS-NIR shows Error code 9:9339SEQ NIR wavelength calibration failed and 9:9303SEQ Unable to initialize the instrument. What is wrong with this machine and how could I fix the problem. Thanks a lot for your advice in advance. MK
Hello, thanks, we are using the version A.04.09 Agilent OpenLAB CDS. And yes, RSDRtDimethyl ist the optional variable Name from the Summary Calculations (RSD from Retention Time). The RSD (from Summary Calc) Format is a Number with 3 Decimal Places. I…
I have been working on an old VWD that was not used much. After running the intensity it failed only on the minimum with a 400 of >6400 cts. So more water was flushed through it over night and the same fail reoccurred. Rebuilt the cell using the g1314…
Hi,
I am currently running a USP <467> protocol which monitors the recovery of: methanol, ethanol, acetone, isopropyl alcohol, hexanes, and toluene. I make a standard solution using DMAC with known amounts of solvent and use the same solution to spike…
Hi James, Just a followup on this. I changed the Lan adapter with G1530-62010. However, I still had a deconnexion this weekend and when sending a ping to the GC, the response time is random and high (between 1ms to sometimes 32ms). Is there anything else…
It is really rare that the transferline itself fails. It's a brazement attached to the MS with three bolts and an O ring seal. The transferline column nut threads get messed up if the column nut is overtightened. Using a 10x32 die to clean the threads…
I have recently ran two standards on the Cary 630 FT-IR using the ATR module - qualitative search. One is Heptanes and the other is N-Heptane.
I then ran four samples - three were N-Heptane, the other was Heptanes and compared them to the two standards…
You can definitely set up an intelligent report to do what you want, but there is a much easier way to do this in OpenLAB ChemStation. When you create a calibration table, ChemStation gives you an option to 'Calculate Signals Separately': When selected…
I went through everything I could find, but it appears that BootP doesn't work properly in Windows 10 and even when you follow the instructions it fails. As I mentioned above, the only way I found to get it working was to replace the JetDirect card with…
I have Chemstation C.01.08 [210]. Whenever I try to run a partial sequence, I get the 'Initialization of Sequence Failed' error message. From what I could find online, that issue was supposed to be solved in C.01.08 version of the software. I have Unique…
This Information Applies To: 4200, 4150 and 2200 TapeStation, TapeStation analysis software A02.02 or higher.
Issue:
When using the Agilent 4200, 4150 and 2200 TapeStation systems, the DV 200 of FFPE RNA samples can be calculated within the TapeStation...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software version B.02.08 or later
Issue
When printing a report to PDF or HTML with the 2100 Expert software, the error "Failed to Generate Report" appears.
Background
This error...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue
Resetting upper or lower markers from their automatically assigned settings in the Agilent 2100 Expert software.
Background
The Agilent 2100 Expert software...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert Software
Issue
Samples with a broad signal such as NGS smears should be analyzed by setting up a region. Analyzing a region is also termed smear analysis.
Steps to Follow...