Autostart Macro failed, error# 999 occurred (OpenLAB CDS Chemstation Rev. C.0x.0x) This is usually resolved by resetting the instrument configuration files in the instrument folder (\Chem32\x\, where x is the number of the instrument in question). Append…
071619 Hi, This question is related to my previous question about method development. The method I devised seems to work well, in that a calibration standard run after my curve is set up yields results that I expected. There is virtually no interferences…
Hi danots, Thank you for your reply. We have tried exchanging the ceramic tubes (upper and outer) several times, but this does not do the trick. Also the columns have been replaced frequently, as we customize the application a lot being R&D. The SCD works…
Hi evryone
Please help: i just get these 2 messages which make me i can not inject from my 7890A and 5973C MSD " tune action stopped: cannot achieve constant peaks widths " also "limits fail: pump oils (days), tune time (hours) at the same moment the…
I don't know if this applies to your specific problem, but a lot of failed uploads and other problems can arise because the GCMS users don't have the proper privileges in ECM. Below is an image with the proper privileges. Assigning the ECM Contributor…
Hi, folks! Suddenly, after about 3 years of shutdown and re-run, our Agilent Q-TOF 6530A has failed. I have problems with signal stability, the signal intensities over time looks like "saw"/waving at all masses.
Here is a typical mass calibration (same…
Users of Agilent Spectroscopy Database Administrator (SDA) software will find many of their questions answered in the attached document. The latest revision of ICP-MS MassHunter software (G7201B, B.01.02) for the 7700 Series ICP-MS and 8800 ICP-QQQ now…
Hi everyone, I am trying to install ChemStation on my Windows 10 Pro computer and I am having some issues. This issue comes up each time I try to configure my instrument and I am not sure why. The HPLC I use is 1260 series from Agilent and has a VWD,…
Recently I noticed a larger pressure fluctuation during the injection process for my 1220 autosampler. I tested the system using Lab Advisor's Pressure too High test and it failed stating that there is a clog. I switched out the needle, needle capillary…
I have a 6890N GC-FID with a 7683 Series ALS and I'm using Agilent Open Lab (EZChrom Edition) software. The software won't trigger the autosampler to make an injection. A box appears on the screen with the message 'Incompatible Tray'. I have verified…
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, ProSize Data Analysis Software
Issue
How to export a ladder as a size calibration file and import it into a different run in ProSize.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software version B.02.08 or later
Issue
When printing a report to PDF or HTML with the 2100 Expert software, the error "Failed to Generate Report" appears.
Background
This error...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue
Resetting upper or lower markers from their automatically assigned settings in the Agilent 2100 Expert software.
Background
The Agilent 2100 Expert software...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert Software
Issue
Samples with a broad signal such as NGS smears should be analyzed by setting up a region. Analyzing a region is also termed smear analysis.
Steps to Follow...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software, RIN NA, Error 4501, RNA 6000 Nano kit (p/n 5067–1511 ), RNA 6000 Pico kit (p/n 5067–1513 )
Issue:
The RIN is not displayed in the software or shows as NA. If the RIN is NA, the...