The operator is using the requeue batch option from an already run batch instead of creating a new batch. Mass Hunter will append the # in this case. I suggest creating a batch template from your desired method and using that for future batches. This…
Check out our new article titled Calibrating the Low Molar Mass Range in GPC/SEC Using Oligomer Peaks , which has been published in the February issue of the Column . The author is Dr. Wolfgang Radke .
We present our Agilent GPC/SEC portfolio and more at Analytica 2024 .
The World's Largest Trade Fair will take place from 09.-12.04.2024 in Munich, Germany . You’ll find us in hall 2 ( A2.201 ). In addition to equipment and colleagues, there will be…
Hi strob
Looks like you guessed that I was hinting at volume overload! The problem is likely to be the basicity of these compounds. I've seen a number of methods that either use higher pH mobile phase (using ammonium formate) to get better peak shape…
It’s all about transmission
Raman spectroscopy has already demonstrated itself to be a useful analytical method in laboratory and process settings, owing to straightforward optical setups, highly specific chemical signatures in spectra, and the ability…
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
It is possible to set up the 2100 Expert software so that the files are automatically exported each time a chip run is complete.
Steps to Follow
To turn...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue:
How to identify and troubleshoot late migration of the ladder, marker, and sample peaks in data generated on the Agilent 2100 Bioanalyzer system.
Background
...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
If communication between the 2100 Bioanalyzer and the PC cannot be established, or if an intermittent communication loss occurs, follow the instructions in...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue
Instructions on how to import from or export data into LIMS software.
Steps to Follow
Data import
When importing sample names and sample comments from...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software version B.02.08 or later
Issue
When printing a report to PDF or HTML with the 2100 Expert software, the error "Failed to Generate Report" appears.
Background
This error...
This Information Applies To: 2100 Bioanalyzer system, 2100 Expert software
Issue
Resetting upper or lower markers from their automatically assigned settings in the Agilent 2100 Expert software.
Background
The Agilent 2100 Expert software...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert Software
Issue
Samples with a broad signal such as NGS smears should be analyzed by setting up a region. Analyzing a region is also termed smear analysis.
Steps to Follow...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software, RIN NA, Error 4501, RNA 6000 Nano kit (p/n 5067–1511 ), RNA 6000 Pico kit (p/n 5067–1513 )
Issue:
The RIN is not displayed in the software or shows as NA. If the RIN is NA, the...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software, RNA 6000 Nano kit (p/n 5067-1511), RNA 6000 Pico kit (p/n 5067-1513)
Issue:
Which assay should be selected in the Agilent 2100 Expert software when running yeast total RNA samples...