Hi Lakshmi, Here is the reply from our compliance group.... Traceability and Audit Trails Data are generated by the same native chromatography data system (CDS) used in the daily operation of the instrument, which controls the system being qualified during…
Hi,
Every time we vent and vacuum down the MS2 auto tune fails with the high mass.
I've tried to tune from factory settings and manual tune using a file that was used prior to the shutdown.
The instrument is second hand so we have had the vendor…
This is a chromatogram of my high standard, Still haven't gotten to the low. Note that this is actually just one compound injected on the sorbent tube. The compound is methyl methacrylate. The tube is Carbopack B,X. The library identifies the compound…
Hi, I would be grateful for the community's insight on an issue that has been plaguing our 6520 Accurate-Mass QTOF-LC/MS. We are able to successful turn on the instrument, power condition, do mass calibrations, and TOF tunes (all the way from quick tunes…
I did a lens ramp on the failed BFB_AT and the emission ramp for 50 amu was very choppy. Setting the emission at 50 amu is where the tune process fails. Could this be due to a hardware problem?
#I am currently battling with MH 4.5 and a generic communication error that has cascaded into me not being able to bring the 7700x into “shutdown” mode for ~6 weeks now. I have had numerous calls with tech support and all suggestions have failed to this…
This article is a compilation of Frequently Asked Questions (FAQs) for Agilent's consumable products in the Chemistries and Supplies Division (CSD). FAQ categories include Filaments and Ion Sources , Gas Management, GC Columns , General , Inlets & Liners…
Hello Yanding, Glad to hear that worked! The needle to seat connection is very resilient to pressure, and can hold at 600 bar and more. I do not believe that would be the reason why the connection failed, it is most likely that the screw or other part…
Hi I'm using chemstation revision G1701EA E.02.02.1431 and the last successful launch was a day yesterday. It seems the malfunction accrued (during a "run" with a "new" method we are trying. involves FID HS for DCM residue, all the vials were sampled…
The Agilent Equipment Qualification Plan (EQP) for OQ is freely available on the Agilent website for potential customers to review. I have attached the standard EQP OQ for GC
This Information Applies To: AriaMx real-time qPCR system
Issue
The instrument fails to reach the required temperature during a run.
Resolution
Check if the temperature of the environment around the instrument is too low resulting in the instrument...
This Information Applies To : Agilent ELSDs G4260A, G4260B, G4261A, G4621B, G7102A, G7102B
Content :
If the evaporator tube of ELSD becomes contaminated with nonvolatile material resulting in poor chromatography, please use the procedure in this...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
The oil should be replaced at least once every six months, or when the oil color is indicates it needs to be changed . The foreline pump should be checked monthly. This article...
This Information Applies To: Agilent ICP-MS MassHunter versions 4.4 - 4.6 and 5.x.
Issue
After performing an autotune, the batch tune report will not generate or print.
Background
ICP-MS MassHunter uses an application called ICP-MS Data Analysis...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve
Issue
Installing the Ion Transfer Capillary after cleaning or replacement in Agilent LC/MS instruments with a gate valve.
Required Items...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify uncalibrated compounds in OpenLab CDS 2.x. using reference compounds in the processing method compound table.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify the uncalibrated compounds in OpenLab CDS 2.x when the analytical method requires a fixed response factor.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
When your Agilent OpenLab ChemStation Edition software fails to launch with errors " Login failed with the following message: Configuration system failed to...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
Agilent OpenLab ChemStation Edition software fails to launch with error containing the words " Autostart Macro failed ”. This article will provide you some...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer and Oligo Pro II instruments, and their respective controller software.
Issue Failed to build pressure error comes up shortly after starting a separation...