Hola! tengo el software chemstation B. 04.03 y necesito saber como realizar la comparacion del espectro de un estándar con el de la muestra para conocer el factor de matcheo. No me aparece el menú "spectra" en el software.
Thanks for the comments I have pasted the requested information below:
This is a new one for us as our lab has been running these instruments for 20+ years and can't ever remember this as a problem. We run trace level organics and almost always splitless…
The Digest of upcoming webinars has been updated as of July 17.
Check out the Perfect Your PFAS Workflows webinar series here .
Notable additions include:
PFAS (2)
Check Out:
Analysis of Multiple Elements in Lithium Salts using an Autodilution…
Category/Series
Recorded/Upcoming Date
Recording Link
Atomic
7/23/2024
Analysis of Multiple Elements in Lithium Salts using an Autodilution ICP-OES Workflow
Atomic
8/6/2024
Elemental Analysis of Lithium-ion Battery Samples…
I completed the inlet leak test and it passed and I also completed the FID jet restriction test and it passed. Yet, when I compare scans on the 8890 the peaks shift more compared to the same injections on my 6890. Does anyone have any thought on this…
Hi Artem1989,
We do not have customer viewable guide. Due to voltages and connections involved, it needs to be installed by a trained Agilent Engineer.
Hello,
Okay you may not have the scope setup correctly on the TotalAreaAdj as that worked on my CDS 2.7 system. It should not be an issue for single channel data but if you ever have results that have more than one signal you will need to look into…
Hello,
I see calibration level 1(1ppb) have a calculated concentration of -0.183 ppb, so the calibration isn't oke. maybe your calibration blank is contaminated or have you used a different batch acid for the blank.
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
When your Agilent OpenLab ChemStation Edition software fails to launch with errors " Login failed with the following message: Configuration system failed to...
This Information Applies To: Agilent OpenLab ChemStation Edition Software (C.01.xx)
Issue
Agilent OpenLab ChemStation Edition software fails to launch with error containing the words " Autostart Macro failed ”. This article will provide you some...
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer and Oligo Pro II instruments, and their respective controller software.
Issue Failed to build pressure error comes up shortly after starting a separation...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve.
Issue
Removing the Ion Transfer Capillary for maintenance on instruments with gate valve. The gate valve allows ion capillary removal and...
This Information Applies To: Agilent OpenLab ChemStation, Agilent OpenLab CDS, Agilent OpenLab EZChrom
Issue
Due to the license error “ An error occurred connecting to the license server: The desired vendor daemon is down. Check the Imgrd log file...
This Information Applies To: HPLC Advisor app
Issue
Legacy HPLC method needs to be translated to a new column or LC system (HPLC to UHPLC or Analytical to Preparative LC).
Requirements
Install the most recent version of the HPLC Advisor...
This Information Applies To: Agilent 7890 A/B, 8860 and 8890 GC Systems with Split/Splitless (SSL), Multimode (MMI) or Programmable Temperature Vaporization (PTV) Inlets
Issue:
The Inlet Leak & Restriction Test is executed after every inlet maintenance...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7, ICP Expert version 7.X
Issue
The AVS can contribute to instrument performance issues such as sensitivity and precision. During troubleshooting, bypassing (or skipping...
This Information Applies To: Agilent GC Systems
Issue
Loss of peak resolution can be a combination of decrease in separation and increased peak width. Loss of resolution can impact on analytical reproducibility and accuracy.
Other chromatographic...
This Information Applies To: Agilent GC Systems
Issue
Contamination that creates ghost and carry over peaks can be introduced at different points including sample preparation, introduction, and separation. The additional peaks can cause false positive...