I think that, with this version of the software, there are configuration files stored in the "instrument number folder", e.g. C:\Chem32\n I was going to suggest that you try to delete/rename the config.reg file, having closed all instances of Chemstation…
Hello,
We have an agilent 6545. Today when we are doing a mass calibration check, the masses of the negative tune ions seems to be shifted (For example 1633.9988 is now showing 1639.2109 and so on for the other ions) and mass calibration check seems…
Hi,
Our QTOF system failed to do a polarity switch from positive to negative. But it works fine at the positive mode. Just wondering if anybody knows the problem. Here is the instrument log record:
Time EventType EventSource Category Description User…
Actually, you have to be sure that it's detector problem or not.
And if still problem persist and after changing lamps intensity test, wavelength test failed again then you have to call to your local agilent support to check electronics and optics etc…
Hi, I am using Agilent 7820A GC-FID with EZChrom Elite v3.3.2. software. After the completion of each sequence, I would like to automatically generate a .text file along .dat file. So far, after the sequence has ended, I process the sequence and then…
As long as you do not see any issues in your measurements, you can keep using the EM, until your new EM has arrived. At some point the Pulse HV will reach ~1800 V and the Analog HV will reach ~ 3300 V (if you are lucky). After that you will have to replace…
Hello, my friend, After checking the logbook on the ChemStation, note that the method did not run due to an error in the G4212B detector indicating: Start Failed (temperature HW). After that, I checked the instrument with the Lab Advisor, and the Logbook…
Hello,
The RI uses a lamp and since it's works on refractive index differences, it doesn't use a wavelength. The RI is what is called a "bulk" detector.
If you are thinking you can replace the lamp, it's part of the optical unit and when it fails…
Good Evening, I realize this is a bizzare question but basically what we have is a Dean Switch GCMS system and we use cut windows to determine when the best time is to switch from column 1 (inlet to switch to 3rd column - vent) to column 2 (inlet column…
Hello team, I wanted to consult the following: an HPLC 1260, I had to reinstall the software. Once I did it, after creating a new method and giving the order to inject, the software turns blue and immediately turns green and does not inject... After checking…
How to Create a New Database in Spectroscopy Database Administrator (SDA)
Multiple Results
This Information Applies To: Spectroscopy Database Administrator (SDA)
Issue
If the old database is full, or after a specific time interval, it is necessary to create a database in SDA. If you receive a message telling you that the database is full...
Update Database Group Path in Spectroscopy Configuration Manager (SCM)
Multiple Results
This Information Applies To: Agilent Spectroscopy Configuration Manager (SCM)
Issue
It is necessary to add a database to a group path in SCM after creating a new database in Spectroscopy Database Administrator (SDA) . If access to an older database...
How to Access Spectroscopy Database Administrator Software (SDA)
Multiple Results
This Information Applies To: Agilent Spectroscopy Database Administrator Software
Issue
The SDA application can only be accessed by a Windows user who is a member of the Windows Administrators group and Windows SDAAdministrators group.
Steps...
This Information Applies To: AriaMx real-time qPCR system
Issue
The instrument fails to reach the required temperature during a run.
Resolution
Check if the temperature of the environment around the instrument is too low resulting in the instrument...
This Information Applies To : Agilent ELSDs G4260A, G4260B, G4261A, G4621B, G7102A, G7102B
Content :
If the evaporator tube of ELSD becomes contaminated with nonvolatile material resulting in poor chromatography, please use the procedure in this...
This Information Applies To: Agilent ICP-MS (7800/7850/7900/8900)
Issue
The oil should be replaced at least once every six months, or when the oil color is indicates it needs to be changed . The foreline pump should be checked monthly. This article...
This Information Applies To: Agilent ICP-MS MassHunter versions 4.4 - 4.6 and 5.x.
Issue
After performing an autotune, the batch tune report will not generate or print.
Background
ICP-MS MassHunter uses an application called ICP-MS Data Analysis...
This Information Applies To: Agilent 6400 Series triple quadrupole LC/MS systems equipped with a gate valve
Issue
Installing the Ion Transfer Capillary after cleaning or replacement in Agilent LC/MS instruments with a gate valve.
Required Items...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify uncalibrated compounds in OpenLab CDS 2.x. using reference compounds in the processing method compound table.
Background
Uncalibrated...
This Information Applies To: Agilent OpenLab CDS 2.x
Issue
This article outlines the procedure on how to quantify the uncalibrated compounds in OpenLab CDS 2.x when the analytical method requires a fixed response factor.
Background
Uncalibrated...