Hi Everyone. I ran GFS on Agilent 1100 HPLC, and the profile is atypical. It seems to be missing a peak and there is also a negative peak. Does anyone know what might be going on?
Mobile phase: 25 mM Ammonium Acetate, pH 8 (not filtered)
Flow rate…
6.80? It's getting a little confusing now. There never was a FW 6.80 for the G1321B, but maybe you had that on your pump. You did not talk about the configuration you have.
If entire stack gets updated to latest FW and you still see an issue, it is…
Hi Pillai,
Thank you for this information. I recommend trying a different cellular adhesive to see if this improves the detaching. Additionally, you may want to increase your seeding density as 10K/well was used in this paper (though these cells were…
Important Information to Set Up Agilent as a Vendor
The Agilent and eMSion teams are excited to announce that, as of 3 June 2024, orders for all products will be handled by Agilent. The currently available software and hardware have been added to Agilent…
Join Agilent Senior Application Engineer, John Screech, live as he explores the critical concepts of vacuum.
We’ll begin with Q = P x S, the formula that explains EVERYTHING about the relationship between gas load, pumping speed, and pressure. John…
This Webinar focuses on the challenges in progressing from High Vacuum (approx. 10^-8 Torr) to Ultra-High Vacuum (below 10^-9 Torr) Pressure. Ion Pumps and Cryo-Molecular pumps are discussed in detail, as are the modifications to High Vacuum Gauges that…
Paul thanks for your reply. I have looked for information about these traps because I have two RMSH-2 traps and I thought about using one for the carrier gas (He) and the other for the FID hydrogen. Anyway, I'm going to buy the hydrogen trap. Thanks …
This Information Applies To: Agilent Liquid Chromatography (LC) systems
Issue:
Shutting down the HPLC for a long period requires following this general procedure to prevent damage to the system and the column.
Steps to follow:
Store the...
This Information Applies To: Agilent G7129A/B Autosampler with Sample Thermostat/Cooler G7167-60101 or G7167-60005.
Issue:
The autosampler may stop working from time to time, potentially giving off loud noises and switching off the light. The only...
This Information Applies To: Agilent 5977A/B GC/MSD with EI source, EI Extractor Source, or CI Source.
Issue:
During normal operation of the GC/MSD, the source will require cleaning. It is time to clean the source when:
There is a loss in analyte...
This Information Applies To: Agilent HES source, Agilent 5977 Series GC/MSD
Issue:
During normal operation of the GC/MSD, the source will require cleaning. It is time to clean the source when:
There is a loss in analyte response not improving...
This Information Applies To: Agilent 5977 and 5975 Series GC/MSD systems
Issue
The autotune fails and reports the error Tune action stopped: Gain and offset = 0 and peaks are too narrow!
Resolution
The MSD autotune program is run after routine...
This Information Applies To: Agilent ICP-MS systems (7700/7800/7850/7900/8800/8900)
Issue
Condition new or cleaned ICP-MS skimmer cones and sampler cones by aspirating a Conditioning Solution before use.
Background
Drift up can be a sign of...
Turn On the GC/MS Interface and Oven Using OpenLab CDS
Multiple Results
This Information Applies To: Agilent GC/MS instruments controlled by OpenLab CDS software
Issue
Turning on the GC/MS interface heater and Oven using OpenLab CDS software.
Steps to Follow
From the Home tab, click Method > Instrument Setup...
This Information Applies To: Agilent ICP-MS systems (7700/7800/7850/7900)
Issue
The signal monitor function in MassHunter can help with troubleshooting low sensitivity, carry over, contamination, or high background. It can also be used to optimize...
This Information Applies To: Agilent UV detectors (Variable Wavelength Detectors, Multiple Wavelength Detectors, and Diode Array Detectors)
Issue
Checking accumulated hours on the UV lamp.
Steps to Follow
There are four ways to check the accumulated...
This Information Applies To: Agilent 7700/7800/7850/7900/8800/8900 ICP-MS
Issue:
Poor internal standard (ISTD) mixing can cause high relative standard deviation (RSD).
The recommendations in this article are applicable if:
It takes a long...