HI Arashjafari,
there is a nice overview article here: Chromatographic bioanalytical assays for targeted covalent kinase inhibitors and their metabolites - ScienceDirect
It should work with Poroshell 120 C18, Zorbax RRHD Extend-C18 or ZORBAX Eclipse…
Don't miss our upcoming webinar series in partnership with Dow. We encourage you to join, whether you are an experienced scientist or new to the field, this series is designed to deepen your understanding and provide practical insights.
① Unraveling…
Hello B
I would need to see your workspace to reveal what has gone wrong with the analysis. Please call us at 800-227-9770 with a serial number of your instrument.
Talk to you soon,
Howard
If you're running a custom macro you'll need to talk to whoever wrote it. Those abundances are incredibly tiny. Allowable electronic signal is somewhere around 50 counts, so unless that is background subtracted the only really useful ions there are 269…
The operator is using the requeue batch option from an already run batch instead of creating a new batch. Mass Hunter will append the # in this case. I suggest creating a batch template from your desired method and using that for future batches. This…
Check out our new article titled Calibrating the Low Molar Mass Range in GPC/SEC Using Oligomer Peaks , which has been published in the February issue of the Column . The author is Dr. Wolfgang Radke .
We present our Agilent GPC/SEC portfolio and more at Analytica 2024 .
The World's Largest Trade Fair will take place from 09.-12.04.2024 in Munich, Germany . You’ll find us in hall 2 ( A2.201 ). In addition to equipment and colleagues, there will be…
Hi strob
Looks like you guessed that I was hinting at volume overload! The problem is likely to be the basicity of these compounds. I've seen a number of methods that either use higher pH mobile phase (using ammonium formate) to get better peak shape…
This Information Applies To: Agilent ICP Expert software.
Issue
The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc.
Steps to Follow
Launch ICP Expert...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to calculate peak-to-valley ratio in OpenLab CDS.
Background
The peak-to-valley ratio is calculated to indicate the quality of peak separation...
This Information Applies To: Agilent 6500 Series Q-TOF LC/MS systems, MassHunter Workstation 10.1 or below and MassHunter Workstation 11.0 .
Issue
Fully reset the Q-TOF LC/MS system via a power cycle without venting. For users who experience slow...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, and Oligo Pro II systems
Issue
The volume of sample used by Agilent parallel capillary electrophoresis systems during a run.
Resolution
The...
This Information Applies To: Agilent 2100 Expert software, 2100 Expert Security Pack, 2100 Bioanalyzer
Issue
When opening the 2100 Expert software and using the Security Pack, the error message " Start of launcher application failed - The requested...
This Information Applies To: Agilent 6890, 6850, 7890, 8890, 8860, Intuvo 9000 GC systems.
Issue
The exchange of the ignitor in a Flame Photometric Detector (FPD) may be required in the following scenarios:
Preventive or periodic maintenance...
This Information Applies To: Agilent 1290 Infinity Quaternary Pump G4204A, 1290 Infinity II Flexible Pumps G7104A/C, and G7131A/C.
Issue
If the flexible/quaternary pump does not generate flow or build up pressure, it could be due to a stuck inlet...
This Information Applies To: Agilent 5200, 5300 and 5400 Fragment Analyzer systems
Issue
Separation times for the Fragment Analyzer for each array format and kit.
Resolution
Caution : The times in this article are the length of time...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, Oligo Pro II, ProteoAnalyzer systems
Issue
Guidance for installing the Agilent parallel capillary electrophoresis instrument controller and/or...
This Information Applies To: OpenLab CDS (version 2.x) system
Issue:
This article explains how to export OpenLab CDS 2.x data as Archived file.
For copying OpenLab CDS 2.x data to another Projects or another OpenLab CDS systems, you can use data...