Hi ,
I have try the method (Isocratic) on the different lines (A,B,C,D) and compare the results . It appear that there was a difference (shift in retention time about 2 mins) in the result were line (A) is used in the method . Thus the problem might…
Dissolution testing is labor intensive as well as a technique and time dependent analytical procedure. A typical dissolution workflow consists of several steps including dissolution media preparation, media filling, introducing the dosage form into the…
Hello all, What is the difference between the IntelliQuant / no IntelliQuant mode in SemiQuant (QuickScan) ? When I activate this option, the LOQ are modified.
In IntelliQuant mode, the LOQ is calculated according to TDS in sample ? Thanks in advance…
CBM said: As you state, the MessageBox.Show() act as if modeless - but the MessageBox.Show() is not modeless, I don't know the correct term, but something with Threads and Async... And in Visual Studio you likely have a common parent, that makes it act…
Here is a "best of" collection of links to manuals and tools for ICP-MS on Agilent.com.
ICP-MS Hardware Troubleshooting & Maintenance Resources
Technical Overview
Agilent ICP-MS Resource Library
Troubleshooting Tool for ICP-MS Sensitivity…
Here is a "best of" collection of links to manuals and tools for the A gilent Microwave Plasma Atomic Emission Spectrometer (MP-AES) , MP Expert Software, and MP-AES accessories and consumables.
MP-AES User Guides
Agilent 4210 MP-AES User’s Guide…
Here is a "best of" collection of links to manuals and tools for Agilent Atomic Absorption Spectrophotometers (AAS) , SpectrAA Software, and AAS accessories and consumables.
AAS User Guides
Instruments
Agilent 55B AA Spectrometer User’s Guide…
Hello jeremy_lai ,
In your latest expression you have removed the first check to see if there is a qualifier peak present. You need to change your first if statement to read as you had it in your previous post.
if BoundItems[“QualifierPeak”] is None…
Hello Yasar ,
To switch from an MRM method to dMRM in acquisition you must have acquired an MRM data file that can be successfully processed in Quant. If for whatever reason the data file cannot be processed in Quant, then you will receive the error…
This Information Applies To: Agilent ICP Expert software.
Issue
The software version is often asked and is a valuable information: to see if any updates are needed, if certain options are available etc.
Steps to Follow
Launch ICP Expert...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to calculate peak-to-valley ratio in OpenLab CDS.
Background
The peak-to-valley ratio is calculated to indicate the quality of peak separation...
This Information Applies To: Agilent 6500 Series Q-TOF LC/MS systems, MassHunter Workstation 10.1 or below and MassHunter Workstation 11.0 .
Issue
Fully reset the Q-TOF LC/MS system via a power cycle without venting. For users who experience slow...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, and Oligo Pro II systems
Issue
The volume of sample used by Agilent parallel capillary electrophoresis systems during a run.
Resolution
The...
This Information Applies To: Agilent 2100 Expert software, 2100 Expert Security Pack, 2100 Bioanalyzer
Issue
When opening the 2100 Expert software and using the Security Pack, the error message " Start of launcher application failed - The requested...
This Information Applies To: Agilent 6890, 6850, 7890, 8890, 8860, Intuvo 9000 GC systems.
Issue
The exchange of the ignitor in a Flame Photometric Detector (FPD) may be required in the following scenarios:
Preventive or periodic maintenance...
This Information Applies To: Agilent 1290 Infinity Quaternary Pump G4204A, 1290 Infinity II Flexible Pumps G7104A/C, and G7131A/C.
Issue
If the flexible/quaternary pump does not generate flow or build up pressure, it could be due to a stuck inlet...
This Information Applies To: Agilent 5200, 5300 and 5400 Fragment Analyzer systems
Issue
Separation times for the Fragment Analyzer for each array format and kit.
Resolution
Caution : The times in this article are the length of time...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer, Oligo Pro II, ProteoAnalyzer systems
Issue
Guidance for installing the Agilent parallel capillary electrophoresis instrument controller and/or...
This Information Applies To: OpenLab CDS (version 2.x) system
Issue:
This article explains how to export OpenLab CDS 2.x data as Archived file.
For copying OpenLab CDS 2.x data to another Projects or another OpenLab CDS systems, you can use data...