Are these FID issues only with this instrument or with others in your lab as well. If this is only on this instrument it might have to do with the H2 or air EPCs. If it is on other systems as well, you might want to check your instrument air. I have seen…
It may. I'll review the Report Template Editor Concepts Guide and your post (@wydnaa) and see how this works .As for how we would calculate this manually, I'd just divide the result but the expected value (in our case 0.02 ppm) and multiply this by 100…
Won't start without a "Mating Connector"
I use RS232 to control the pump. The mating connector is not present,
The manual says short pins 4 and 5 and pins 8 and 9 of the IO port.
This results in ramp-up and fail.
What is the correct wiring for…
Hello,
Our 6545 QTOF has been idle for a few weeks. When I checked the computer today, I found that "communication failed" errors had started appearing a few days after the instrument was last put to Standby. I'm not sure what happened as I don't think…
Hi, We observed an error during autotune of QQQ GCMS as "Peak width gain failed", When it was occurred and what is the reason for the repeat error, Autotune was not completed due to " Peak width gain failed".
Please suggest the recommendations and possibility…
I have a GC 6850 with an FID. I'll have to upgrade to Windows 10 soon, because Windows will no longer provide security updates for Windows 7. If I upgrade my computer to Windows 10, is there a ChemStation version that's compatible with the 6850 and Windows…
Hi, I am using a 6890 GC in split mode with an isothermal temperature and no flow ramp and operating in constant pressure mode. Please can you advise how using the setting constant makeup flow for the FID detector is different to constant column and makeup…
Hello Michael,
It's kind of a yes and no answer. Technically, the wavelength calibration will have failed because the strontium wavelength was not found - so you will see this if you check the results. Practically this is unlikely to impact operation…
My manager is wanting me to add pass/fail system suitability assessments to my reports/processing methods. In order to limit my validation work and minimize the number of report templates that I am maintaining, I am trying to keep the report adaptive…
Please check your data files and make sure the solvent peak is completely excluded . I have found that some data files I cannot detect ANY analytes of interest in Optimizer, even though I can identify them in standalone Unknowns Analysis. Without fail…
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...