It depends on what you have installed. There is an upgrade kit. The old-style chambers are no longer available. You may want to contact your local service group.
Also, if too costly maybe upgrade to a newer degasser.
5067-5387 vacuum chamber replacement…
Here's what's new in the latest release of MassHunter BioConfirm Software.
New peptide ECD fragmentation MS/MS capabilities with c and z fragment ion data analysis
Expanded capabilities for linear synthetic peptide analysis
Modernized interface…
The senTorr controller used to have a RS232 Serial communication add-on kit, but it was obsoleted as well as the senTorr gauge controller. The XGS600 is the current Agilent Gauge controller for Ion Gauges. Vacuum Multi-Gauge Controller ATM-XHV, XGS-600…
Generally, you would start method development with what you find in the USP and/or FDA Dissolution Method Databases for volume, media, RPM, etc. requirements. The FDA method database points you to: Dissolution Testing and Acceptance Criteria for Immediate…
That turbo controller and the 300HT turbo pump are obsolete. The RS232 communication kit referenced in the controller manual is also no longer sold by Agilent (previously Varian).
The current model turbo pump of that size is the 305FS turbo. Turbo Pumps…
Hello Kart995,
What vintage is your Bravo, could you please share serial number?
which .dev file are you trying to load did it work on this computer before?
Does the error say "Device type Bravo does not exist"
Are you able to initialize the Bravo…
As the filament gets older and the source dirtier areas will go down. Just bump up the EM volts a little by say 24 and see what you get. Keep bumping it up until you get areas you want. It should not change the tune much. You can always set it back to…
Discover the latest Agilent GC/MS and LC/MS technologies . Join thought leaders and your Agilent team of experts for our LC/TQ and IM/Q-TOF user meetings , come to one of our breakfast sessions , or register for a webinar .
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...