Hi j esus5802
You can try in Previous Results tap /Highlight the spectrum for changing sample name/
Go to view/ then click Data Handling/ enter new sample ID name in the field sample id name/
click on back/ and go to re-Analyze
Select a method…
Hi rahmicetinkaya
We do not have a user manual for a cary 630 FTRI gas cell module,. I have attached some explanations about the use of the gas cell. Hope it helps you
Thanks
Regards
Hi Ardalan.P
Did you change the computer or the computer name?
You can copy license file from "C:\ProgramData\Varian\Cary License.lic" into WinUV folder "C:\Program Files (x86)agilent\Cary WinUV\",
if you change the computer you should find the…
This video guides you through the process of replacing the Electron Multiplier Horn for the Ultivo (G6465A, G6465B), iQ (G6160A).
This video is intended to support the written instructions found in the online help or in your Instruments User Guide.…
This video guides you through the process of replacing the oil and filter for the MS120 pump and applies to G6495 models with an MS120 pump.
This video is intended to support the written instructions found in the online help or in your instrument's…
This video guides you through the oil and filter change process for the MS40+ pump and applies to all LC/MS models equipped with an MS40+ pump.
This video is intended to support the written instructions found in the online help or in your instrument…
This video guides you through the process of removing or installing the nebulizer and applies to all LC/MS models.
This video is intended to support the written instructions found in the online help or in your instrument's user guide.
Parts required…
Hi Mau1909
We can perform this type of measurements with the Cary Eclipse. This is called EEM (Excitation-Emission-Matrix):
3D graph or contour plot are available. The 3D mode automatically collects a series of excitation, emission, or synchronous…
This Information Applies To: Agilent MassHunter 11 and later
Issue
Generating Acquisition Desktop and Quantitative Analysis shortcuts.
Steps to Follow
Double-click the Control Panel icon on the desktop or select Windows Start menu > Agilent...
This Information Applies To: Agilent MassHunter Workstation for LC/TQ and MassHunter Workstation for LC/TOF and LC/Q-TOF
Issue
How to view the MassHunter Data Acquisition Software Logs entries, change settings, and export the Logbook for archiving...
This Information Applies To: ICP-MS MassHunter with User Access Control (UAC)
Issue
It is necessary to update the database folder path in Change User Access Control:
After creating a new database in SDA with ICP-MS MassHunter.
To view a batch...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Over time, the electrodes may become pitted or eroded and users may see a decrease in precision or begin to experience the "Tube fault" error when new tubes are installed. If...
This Information Applies To: Agilent GTA Furnace and Flame Instruments, Agilent 240FS/240GFAA/GTA120/PSD120
Issue
There may be occasions when users need to remove GTA furnace center block workhead (instruments with both Flame and Furnace capabilities...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
The shroud should be replaced annually, or when there is evidence of damage caused by mechanical shock or contamination from liquid spillage.
Items Required
Shroud Removal...
This Information Applies To: Agilent GTA 120, 240/280 GTA Furnace
Issue
Before replacing the electrodes and/or shroud, the GTA Furnace workhead will need to be disassembled. After replacing the electrodes and shroud, the GTA Furnace workhead will...
This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, ZAG DNA Analyzer
Issue
After starting a run, the run is aborted with the following error: Current = 0.0uA, Expected range: 5 - 3000.
Steps to Follow
Check...
This Information Applies To: Agilent OpenLab CDS 2.x in file system configuration
Issue
Sometimes, you will need to change the Projects Root Path / Project Storage Path . This article outlines the procedure on how to change it.
Background
...
This Information Applies To: 5000 series ICP-OES (5100,5110,5800,5900), AVS 4/6/7
Issue
Steps to bypass the AVS to troubleshoot poor performance on the ICP-OES
Tip : These steps should be completed after the Subsystem Communication...