Hi danielchsny , Yes power spikes from unscheduled power interruptions can cause damage to sensitive electronic circuits. Another contributing factor is that when power is lost to the LC/MS running under high vacuum the rough pump will stop, causing a…
Hi Carol_Ultivo , There is always a trade-off or balance to be struck between Scan speed, mass resolution and sensitivity in any quadrupole mass filter. So, if you decrease the resolution and keep scan speeds the same you will naturally get an increase…
Yes - it was a bit of a mess - but I was able to fix it. Thanks for the heads up. Not everything could be fixed in the computer portion of the method. I had to go into the GC configuration and fix it there.
Thank you!
Thank you for the suggestions. Yes, some of what I'm doing does not require the ISTD but I leave it in the analysis method b/c of needing it in some of the work. I haven't had a chance to work on this in a couple of weeks, but will definitely keep it…
Hello Adrsto ,
I apologize for the delayed repsonse.
It is not possible to use the NIST algorithm itself within Unknowns Analysis. As you mentioned, you can adjust the forward and reverse settings and enable the Adjust Score option, which from the…
Hello Lstephan ,
I apologize for the delayed response.
Errors of this type generally point to an issue with a preferences file. The first thing to try is clearing these using the Restore User Settings tool found in the Quant Tools group in the start…
Hello AJohnson13 ,
This is a known issue if Acquisition has been pinned to the Windows Taskbar and run from there in MassHunter Acq Version 11.x and later. This is due to the OpenLab integration and the need to launch through Control Panel to include…
Please give more information. TSU - is that Thermal Screening Unit? You say under varying pressures...from zero to how many PSI/Bar? Will you need to use a vacuum to get the sample? Will this be analytes in air or something else? Decomposition of what…
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, Oligo Pro II, and ZAG
Issue:
Only plasticware from the approved consumables list should be used in the Agilent Parallel Capillary Electrophoresis systems. The use of plasticware...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Question:
Can more than one Agilent 2100 Bioanalyzer instrument be connected to one PC?
Steps to follow:
It is possible to connect a maximum of two Bioanalyzers to one laptop...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer Chip Priming Station: part number 5065–4401
Maintenance procedures and how frequently they are required :
Procedure
Time interval
Or if this issue occurs
Where to find a detailed...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
Running the hardware diagnostics on the Agilent 2100 Bioanalyzer system can help to investigate whether the instrument performs as expected.
Steps to follow:
Required...
This Information Applies To: 2100 Bioanalyzer, RNA 6000 Nano kit, RNA 6000 Pico kit, Small RNA kit
Issue:
Is it possible to size RNA on the Agilent 2100 Bioanalyzer system?
Resolution:
Agilent offers total and small RNA assays on the Bioanalyzer...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue:
The Agilent 2100 Bioanalyzer system does not detect a prepared microfluidic chip after it is inserted into the instrument. The interface shows the instrument...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer chips
Issue:
Can 2100 Bioanalyzer assay chips and reagents be interchanged?
Resolution:
Some assay chips can be used with multiple assays, however some cannot because the chip layout...
This Information Applies To: Agilent MassHunter GC/MS Acquisition software
Issue
The MassHunter software performs several checks during the startup sequence. If it detects a problem, an alert message box will be displayed and the message bar on...
This Information Applies To: Agilent MassHunter Quantitative Data Analysis Software
Issue:
The "NO DATA POINTS" error message appears in the Compound Information window in the lower-left corner in Quantitative Analysis. Sometimes, this problem may...
This Information Applies To: Agilent GC/MSD MassHunter with MSD ChemStation Data Analysis
Issue
When you are using the Data Analysis Report, you may need to specify a certain number of decimal places for your results different to the default decimal...