Hello,
That looks like Chemstation in the integrator preview window can you relay the version and confirm the table captured. If that is the case these are preliminary results from the integrator preview for final values, I would look at the reports…
Support and educational resources for the Labware Stacker .
Support Documents
G5586A Labware Stacker Site Preparation Checklist
G5407A Labware Stacker Site Preparation Checklist
User Guides
Labware Stacker User Guide
Stacker ActiveX…
GC Inlet Maintenance
Find links and part numbers to the consumables used in the video here.
GC Septum
Inlet septa are used to maintain a leak-free seal at the GC inlet, even after repeated injections.
If the septum has a dimple, the dimple…
Modern labs are constantly looking for opportunities to improve their efficiency and reduce the workload of their staff. Automating repetitive tasks can help to maximize instrument usage and free up operators to perform other tasks, improving overall…
Unless you are strictly matrix matching your calibration standards to your samples, it is best to use an internal standard to account for matrix effects. This is standard practice in ICP-OES. Most people use Yttrium or Scandium, an element that is not…
A new educational page from Agilent’s Liquid Chromatography experts is now available. The brand-new HPLC Fundamentals page is curated specifically for scientists wanting to know more about HPLC technology. It also provides answers for HPLC related frequently…
Hi Raina,
on Carbon columns H 2 will be the first peak closely followed by methane. Like on all PLOT columns overloaded peak shift to smaller retention times, i. e. into your hydrogen signal. There is nothing you can do with this type of column. Hydrogen…
Hello Elei , This is just the normal system pressure as measured by the pressure sensor inside the pump. You can check this from the online or acquisition section of your SW, under the pump status. What SW are you currently using?
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, Oligo Pro II, and ZAG
Issue:
Only plasticware from the approved consumables list should be used in the Agilent Parallel Capillary Electrophoresis systems. The use of plasticware...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Question:
Can more than one Agilent 2100 Bioanalyzer instrument be connected to one PC?
Steps to follow:
It is possible to connect a maximum of two Bioanalyzers to one laptop...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer Chip Priming Station: part number 5065–4401
Maintenance procedures and how frequently they are required :
Procedure
Time interval
Or if this issue occurs
Where to find a detailed...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
Running the hardware diagnostics on the Agilent 2100 Bioanalyzer system can help to investigate whether the instrument performs as expected.
Steps to follow:
Required...
This Information Applies To: 2100 Bioanalyzer, RNA 6000 Nano kit, RNA 6000 Pico kit, Small RNA kit
Issue:
Is it possible to size RNA on the Agilent 2100 Bioanalyzer system?
Resolution:
Agilent offers total and small RNA assays on the Bioanalyzer...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue:
The Agilent 2100 Bioanalyzer system does not detect a prepared microfluidic chip after it is inserted into the instrument. The interface shows the instrument...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer chips
Issue:
Can 2100 Bioanalyzer assay chips and reagents be interchanged?
Resolution:
Some assay chips can be used with multiple assays, however some cannot because the chip layout...
This Information Applies To: Agilent MassHunter GC/MS Acquisition software
Issue
The MassHunter software performs several checks during the startup sequence. If it detects a problem, an alert message box will be displayed and the message bar on...
This Information Applies To: Agilent MassHunter Quantitative Data Analysis Software
Issue:
The "NO DATA POINTS" error message appears in the Compound Information window in the lower-left corner in Quantitative Analysis. Sometimes, this problem may...
This Information Applies To: Agilent GC/MSD MassHunter with MSD ChemStation Data Analysis
Issue
When you are using the Data Analysis Report, you may need to specify a certain number of decimal places for your results different to the default decimal...