I am using the 1260 Infinity G1312B bin pump. The A1 is selected and its drawing mobile phase out of the A2 media bottle. Can anyone share some insight into this issue.
Thank you,
I am using the 1260 Infinity G1312B bin pump. The A1 is selected and its drawing mobile phase out of the A2 media bottle. Can anyone share some insight into this issue.
Thank you,
Hi Rpsly,
Are the lines correctly set up? Is the line from bottle A1 going to the A1 position on the valve?
Mitch
Hi Rpsly,
Are the lines correctly set up? Is the line from bottle A1 going to the A1 position on the valve?
Mitch