Hi everyone,
we wanted to clean the ion source for the first time.
The videos were unfortunetly not very helpfull. We lowered the temperature of gas and sheath gas and let it cool to 25°C, and then lowered the flow rate of the gas. if we would put…
Are you interested in GPC/SEC technology and want to deepen your knowledge? Then the following two classroom training courses at our Agilent University are just right for you.
Note: The course is in German, with English slides. The course will be held…
HPLC 2024 will be held from July 20-25 , 2024 in Denver , Colorado this year. We will host our Reach Your Summit Reception which will be held on July 23 rd from 6pm – 8pm local time at Earl’s Kitchen + Bar. At this event, you will find different areas…
Hello Ruthvn Please share some photos of your chromatograms and check for void volumes in capillary connections. Once the issue occurs, does it keep occurring for subsequent injections or do the resolution and acceptable peak shape come back in later…
Hello LCMSvsLCUV Would you be able to share more details about what you are trying to achieve please, including the instrument set up, application, analyte of interest and the column part number?
We are having a issue clearing up these valleys/dips after our peaks of interest. So far we have confirmed no leaks up to the column (pressure and leak test passed), new column, new guard column, new mobile phases, new standards, and several purges through…
Hello,
I will assume you mean you are using the backup restore tool for CDS 2.4 not the ECM XT import scheduler. If you have setup an import scheduler task to back the ECM-XT system up that would be self-referential and would not actually back anything…
This Information Applies To: 5200/5300/5400 Fragment Analyzer, Femto Pulse, Oligo Pro II, and ZAG
Issue:
Only plasticware from the approved consumables list should be used in the Agilent Parallel Capillary Electrophoresis systems. The use of plasticware...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Question:
Can more than one Agilent 2100 Bioanalyzer instrument be connected to one PC?
Steps to follow:
It is possible to connect a maximum of two Bioanalyzers to one laptop...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer Chip Priming Station: part number 5065–4401
Maintenance procedures and how frequently they are required :
Procedure
Time interval
Or if this issue occurs
Where to find a detailed...
This Information Applies To: 2100 Bioanalyzer, 2100 Expert software
Issue:
Running the hardware diagnostics on the Agilent 2100 Bioanalyzer system can help to investigate whether the instrument performs as expected.
Steps to follow:
Required...
This Information Applies To: 2100 Bioanalyzer, RNA 6000 Nano kit, RNA 6000 Pico kit, Small RNA kit
Issue:
Is it possible to size RNA on the Agilent 2100 Bioanalyzer system?
Resolution:
Agilent offers total and small RNA assays on the Bioanalyzer...
This Information Applies To: Agilent 2100 Bioanalyzer system, 2100 Expert software
Issue:
The Agilent 2100 Bioanalyzer system does not detect a prepared microfluidic chip after it is inserted into the instrument. The interface shows the instrument...
This Information Applies To: 2100 Bioanalyzer, Bioanalyzer chips
Issue:
Can 2100 Bioanalyzer assay chips and reagents be interchanged?
Resolution:
Some assay chips can be used with multiple assays, however some cannot because the chip layout...
This Information Applies To: Agilent MassHunter GC/MS Acquisition software
Issue
The MassHunter software performs several checks during the startup sequence. If it detects a problem, an alert message box will be displayed and the message bar on...
This Information Applies To: Agilent MassHunter Quantitative Data Analysis Software
Issue:
The "NO DATA POINTS" error message appears in the Compound Information window in the lower-left corner in Quantitative Analysis. Sometimes, this problem may...
This Information Applies To: Agilent GC/MSD MassHunter with MSD ChemStation Data Analysis
Issue
When you are using the Data Analysis Report, you may need to specify a certain number of decimal places for your results different to the default decimal...