Realise this is an old post but for anyone else that has this issue, the example seems to be wrong, change it to: A = FConvert("My Data", 1, "FILE6.CSV")
If you have the inputs in the wrong order as in the example you will get a type mismatch.
I ran…
Good morning everyone,
We would like to analyse pré-polymers, produced for food contact, for possible contaminants forbidden, and/or regulated, in the food industry.
First of all, we need to establish a list of those compounds and then find out…
Hello Hoernchen117 ,
The reporting scripts are for use in custom Python report templates that are called by reporting methods in quant. See the Reporting Developers Guide for details on how to use them and how to set up the Visual Studio environment…
Hello kimgj ,
This is more than likely a board problem, and the recommendation is having an Agilent representative replace that for you. A similar problem was posted in the past , slightly different error, but very likely the same outcome.
I would…
Hello LloydSteven ,
There is no procedure available for how to remove a keyboard on the 7890 or any Agilent GC that I am aware of.
I would recommend for that type of replacement that you reach out to your local Agilent Team .
IMPORTANT: You must have an Agilent.com user account to retrieve your certificate. Click the Account button located above the search bar to sign into your account or to create an account. Please sign in before searching for a certificate.
Product Family…
Hi howard_sanford,
thanks for your help.
I'm a little bit wondering, why has the ICompoundsAtAGlance a .Show()-method too?
I found out that I can use the following code:
ICompoundsAtAGlance.Show()
Before I tried this one:
CAG = ICompoundsAtAGlance…
Hello,
If you look on your installation media, typically a thumb drive, you will find the licenses agreement as a PDF in M8490-10007\Setup\Licenses.
Marty
For anyone interested in taking a look at our port loading guides/protocols, please see below:
Loading the Agilent Seahorse XFe96 Sensor Cartridge Injection Ports
Loading the Agilent Seahorse XFe 24/XF24 Sensor Cartridge Injection Ports
Loading…
This Information Applies To: Agilent GC Systems
Issue
A shift in retention time can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
A change in peak size can occur for single, multiple or all peaks.
Other chromatographic problems are identified in Basic Troubleshooting for GC Systems . Regular maintenance of your instrument...
This Information Applies To: Agilent GC Systems
Issue
Peak splitting is when a single compound is shown in the chromatogram as two peaks usually unresolved, or one of the peaks is a shoulder.
Other chromatographic problems are identified in Basic...
This Information Applies To: Agilent GC Systems
Issue
This test isolates the point of contamination to the sample introduction system, which includes the gas supply, gas supply lines, and the sample inlet. It does not include the syringe or autosampler...
This Information Applies To: Agilent GC systems
Issue
Peak tailing is present in a chromatography peak when it has an excessive asymmetry with a trailing edge. A normal peak is almost symmetrical.
Other chromatographic problems are identified...
T his Information Applies To: Agilent 8890/8860/7890/7820/6850/6890 GC Systems with TCD (Thermal Conductivity Detector)
Issue
Problems observed with thermal conductivity detector (TCD) results can have different underlying causes.
Resolution...
This Information Applies To: All GCs, 6890, 6850, 7890, 7820, 8890/8860, Intuvo 9000
Issue:
This article is a troubleshooting guide for when the Flame Ionization Detector (FID) does not ignite or the flame keeps going out.
Cause:
If the FID...
This Information Applies To: Agilent GC Systems with Flame Ionization Detector (FID)
Issue:
The Flame Ionization Detector (FID) jet could become clogged with ferrule material, column bleed, or heavy molecular analytes. The clogged jet will affect...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different high concentration, split analysis techniques including:
General use liners
Auto inject, general use
Auto...
This Information Applies To: Agilent GC Systems with Split/Splitless (S/SL) inlet
Issue
Different liners are required for different splitless trace analysis techniques including:
General use liners
Pressure, temperature, volume (PTV)
Hot...