This video guides you through the process of removing the capillary on a system with a VacShield and applies to G6470B, G6475A, G6495C, G6495D, Ultivo (G6465A, G6465B) iQ (G6160A), and Revident (G6575A).
This video is intended to support the written…
This video guides you through the process of installing and removing a capillary with a gate valve and applies to G6495B, G6546A, and 6545XT AdvanceBio (G6549A).
This video is intended to support the written instructions found in the online help or…
New FID Jet!
The latest FID jet is intended for use in 6890/7890/8890/8860/8850/9000 GC models
The legacy jets will not work in the 8890/8850/8860/9000 GC models
The new jet makes installing the column seamless with a conical shape to direct the…
Hello,
you will have to ask your local FSE for installation has it’s very big and offline installation. So if you have a visit plan ask for the help website for Masshunter. It will not be integrated with Masshunter but will work has a website.
Hi Everyone. I ran GFS on Agilent 1100 HPLC, and the profile is atypical. It seems to be missing a peak and there is also a negative peak. Does anyone know what might be going on?
Mobile phase: 25 mM Ammonium Acetate, pH 8 (not filtered)
Flow rate…
6.80? It's getting a little confusing now. There never was a FW 6.80 for the G1321B, but maybe you had that on your pump. You did not talk about the configuration you have.
If entire stack gets updated to latest FW and you still see an issue, it is…
Hi Pillai,
Thank you for this information. I recommend trying a different cellular adhesive to see if this improves the detaching. Additionally, you may want to increase your seeding density as 10K/well was used in this paper (though these cells were…
This Information Applies To: Agilent OpenLab CDS
Issue
Identifying the baseline codes and baseline code descriptions for OpenLab CDS
Background
OpenLab CDS Data Analysis includes the same integration algorithms as available in both OpenLAB...
This Information Applies To: Agilent OpenLab CDS
Issue
This article provides step-by-step instructions to filter a signal in an Intelligent Report.
Requirements
To be able to carry out the procedure as described, the privilege of Data Processing...
This Information Applies To: Agilent OpenLab CDS
Issue
This article outlines different ways to quantify the amount of compound in an unknown sample.
Background
Quantitation uses peak area or height to determine the amount of a compound in...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle seat of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent G1329A/B and G1313A Standard Autosampler
Issue
Replacing the needle of the Agilent 1100/1200/1260 Standard Autosampler may be required during regular maintenance, replacing a bent needle, or flow path blockage...
This Information Applies To: Agilent 1290 Infinity (G4226A) and Agilent 1260 Infinity (G1367E) HiP Autosamplers
Issue
Replacing the Needle Assembly of the Autosampler is required when:
The needle is visibly damaged.
Leaks or blockages in the...
This Information Applies To: Agilent 6000 Series LC/MS Systems equipped with MS40+ rotary vane pumps
Issue
Replacing the MS-40+ (rough pump) fluid periodically is a key maintenance procedure to improve vacuum performance and minimize the possibilities...
This Information Applies To: All Agilent 6000 Series LC/MS Systems without a gate valve for ion capillary installation/removal. For instructions for removing an ion capillary on LC/MS instruments with a gate valve installed, please click here
Issue...
This Information Applies To: Agilent 6000 series LC/MS instruments
Issue:
Cleaning the ion transfer capillary as part of regular maintenance or as part of troubleshooting when a loss of sensitivity in the instrument occurs.
Steps to follow ...
This Information Applies To: Agilent 6000 Series LC/MS systems.
Issue
Efficient electrospray ionization (ESI) in your LC/MS ion source requires a properly adjusted nebulizer needle in good condition. The nebulizer needle is a consumable item in...