Sounds good. Just wanted to double check why it was not working. I had a noise and drift test fail before on LabAdvisor and it was due to a test not functioning properly. The Leak test and Pressure test both passed and system has been working fine. Thanks…
Hi Azrael, Publication Part Number: A02028 might be one of several apps to look at. if you could elaborate which targets are nice but not required for quantitation? It appears that Argon is the carrier and sample prep diluent gas then, though He/H2 are…
Hello, SW: MassHunter Workstation, Quantitative Analysis, Drug Analysis for GC, Version 10.1 Build 10.1.733.0 I am trying to batch process data acquired by GC-FID but I unable to generate the correct sample result since I don't know where to enter the…
I get a bunch of junk on the front panel of the GC and the detectors I have (PID and FID) end up going cold. It is a bunch of work to re-calibrate due to software stuff we have to do for the method we are running. Plus the 1/2 hr runs I do take a while…
Do you have the Polyboost on? If not, the wavelengths below 190nm will fail. It would be good to know which wavelengths are failing. On the wavecal tab, click "Store dark current" and see where the wavelength calibration file is being saved. Then using…
I have been operating an 7890A/5975C with Chemstation version E.02.00.493 for a couple of years. The autosampler is a Gerstel MPS2 (model MXY-02-00B) controlled by Maestro version 1.10[017] and the GC has an FID in the front detector position. I have…
Hello,
we want to analyse a gas mixture (CO2, CO, propane, ethane and methane in hydrogen) with the HP 6890 Series GC System (G1540A). The gases are coming to the column via a six-way valve and after the column, there is a TCD and a FID detector. In…
Hello, I have a TCD + FID GC 6890. Need to upgrade to Windows 10, because Windows will no longer provide security updates for Windows 7. Is Chemstation B.04.03 compatible with windows 10? Alternatively, will A.10.02 be compatible with GC6890? Thanks for…
Hello Agilent Community Our Zero Air / Nitrogen generator from Parker Balston broke down and it has been discontinued. The supplier does not offer replacement parts and they do not longer have a gas generator model with the combination Air/Nitrogen. Therefore…
This Information Applies To: 5975 and 5977 GC/MS systems with MassHunter Acquisition software
Issue:
High-quality GC/MS data requires a low, and stable background of air and water present in the MS analyzer.
This article demonstrates a systematic...
This Information Applies To: Agilent 5975 and 5977 GC/MSD systems with MassHunter Acquisition software
Issue:
High-quality GC/MS data requires a low, and stable background of air and water present in the MS analyzer. This article describes how to...
This Information Applies To: Agilent 5977A/B GC/MSD with MassHunter GC/MS Acquisition Software
Issue:
This article describes the procedure to safely vent (shut down) the 5977A/B GC/MSD with Electron Ionization (EI)
The MSD will be damaged by incorrect...
This Information Applies To: HES ion source in 5977B/C GC/MSD, 7010 triple quadrupole GC/MS systems
Issue
The filaments are replaced as part of routine maintenance, or when they break (zero output current).
Items Required
Gloves, nylon,...
This Information Applies To: Agilent 5977A/B/C GC/MSD
Issue
The Electron Multiplier Horn must be replaced when it is contaminated or the EMV value reaches 3000 V with a clean ion source.
Items Required
Electron multiplier horn (5977B/C:...
This Information Applies To: Agilent 5973/ 5975/5977 GC/MSD with rotary vane foreline pump
Issue:
The oil mist filter is recommended to be replaced annually. If the color of the filter has changed or there is smell from the filter, the oil mist...
This Information Applies To: Agilent EI Source
Issue:
During normal operation of the GC/MS, the EI SST/Inert ion source will need to be disassembled to proceed with abrasive ion source cleaning and / or routine replacement of consumable parts (filaments...
This Information Applies To: Agilent G7129A/B/C Vialsampler
Issue:
Replacing the needle and needle seat of the Vialsampler is required when:
The needle is visibly damaged.
Leaks or blockages in the vialsampler are observed, especially between...
This Information Applies To: Agilent G1311A/B/C, G7111A/B, Quaternary Pumps, and G1310A/B, G7110B Isocratic Pumps, G1312A/B/C, G7112B Binary Pumps
Issue:
How to diagnose no flow or no pressure issues on binary, quaternary, or isocratic pumps.
...
This Information Applies To: Agilent UV and RID detectors
Issue
A clogged flow cell causes high backpressure. The clog can be removed by flushing the system with solvents at high pressure. If you suspect a clog or experience high backpressure due...