This video guides you through the process of replacing the Electron Multiplier Horn for the Ultivo (G6465A, G6465B), iQ (G6160A).
This video is intended to support the written instructions found in the online help or in your Instruments User Guide.…
This video guides you through the process of replacing the oil and filter for the MS120 pump and applies to G6495 models with an MS120 pump.
This video is intended to support the written instructions found in the online help or in your instrument's…
This video guides you through the oil and filter change process for the MS40+ pump and applies to all LC/MS models equipped with an MS40+ pump.
This video is intended to support the written instructions found in the online help or in your instrument…
This video guides you through the process of removing or installing the nebulizer and applies to all LC/MS models.
This video is intended to support the written instructions found in the online help or in your instrument's user guide.
Parts required…
Hi Mau1909
We can perform this type of measurements with the Cary Eclipse. This is called EEM (Excitation-Emission-Matrix):
3D graph or contour plot are available. The 3D mode automatically collects a series of excitation, emission, or synchronous…
The universal VUV detector has sensitivity better than an FID and similar to an MSD while allowing data acquisition across 12 different wavelength bands to focus on selected compounds of interest. It can be mounted directly on top of an Agilent 7890 or…
Hi,
I have been getting a Hexapole 2 RF fault on a 6545 QTOF for the past few weeks. The logbook shows that it came on for short periods for a couple of days, then went away for a few days, then came on continuously since then.
I called it in, and…
Hello mohls ,
The default location for the log file should be within the D:\MassHunter folder. Since it appears to be trying to write the log to the C:\Program Files folder, which will never succeed, I suspect that something has occurred with the BioConfirm…
T his collection of “best of” resources includes manuals and site-preparation checklists , specifications, application and how -it-works information, videos and webinars , and eLearning courses for Agilent Automated Liquid Handling instrument and software…
Ok so I guess you have to manually move the arm out because the inside screw is covered by the turret. It seems hard to move though and I don't want to break it.
This Information Applies To: HES ion source in 5977B/C GC/MSD, 7010 triple quadrupole GC/MS systems
Issue
The filaments are replaced as part of routine maintenance, or when they break (zero output current).
Items Required
Gloves, nylon,...
This Information Applies To: Agilent 5977A/B/C GC/MSD
Issue
The Electron Multiplier Horn must be replaced when it is contaminated or the EMV value reaches 3000 V with a clean ion source.
Items Required
Electron multiplier horn (5977B/C:...
This Information Applies To: Agilent 5973/ 5975/5977 GC/MSD with rotary vane foreline pump
Issue:
The oil mist filter is recommended to be replaced annually. If the color of the filter has changed or there is smell from the filter, the oil mist...
This Information Applies To: Agilent EI Source
Issue:
During normal operation of the GC/MS, the EI SST/Inert ion source will need to be disassembled to proceed with abrasive ion source cleaning and / or routine replacement of consumable parts (filaments...
This Information Applies To: Agilent G7129A/B/C Vialsampler
Issue:
Replacing the needle and needle seat of the Vialsampler is required when:
The needle is visibly damaged.
Leaks or blockages in the vialsampler are observed, especially between...
This Information Applies To: Agilent G1311A/B/C, G7111A/B, Quaternary Pumps, and G1310A/B, G7110B Isocratic Pumps, G1312A/B/C, G7112B Binary Pumps
Issue:
How to diagnose no flow or no pressure issues on binary, quaternary, or isocratic pumps.
...
This Information Applies To: Agilent UV and RID detectors
Issue
A clogged flow cell causes high backpressure. The clog can be removed by flushing the system with solvents at high pressure. If you suspect a clog or experience high backpressure due...
This Information Applies To: Agilent G1312X and G7112X binary pumps.
Issue:
A blockage before the pressure sensor, e.g. in a pump head, will not give a high pressure or overpressure system error. Instead, the pump may show one of various error messages...
This Information Applies To: Agilent 1100, 1200, 1260 LC Pumps.
Issue:
The following procedure allows the cleaning of residue from the pump's check valves, often caused by polymerization of aged acetonitrile or salt-based solutions that may prevent...
This Information Applies To: Agilent LC Systems
Issue
After analyzing dirty or concentrated samples, some sample compounds may retain in the column and other parts of the HPLC system. If the column re-equilibration after each run is not enough to...