I'm a new GC/MS user and I have the following error: Inlet: Pressure Pre Shutdown warning after changing the column of a Intuvo 9000 Device. The total flow target of 4mL +/-2mL/min fails and the leak rate doesnt' reach values below 11mL/min. Can anyone…
Hello,
I have inherited a 5975 MSD and when I go to autotune, there are no peaks present and the tune fails. I get alternating errors "Gain and Offset = 0 and peaks are too narrow" or "Tune action stopped: The valid Range for Ent Lens Offset is 0…
It may. I'll review the Report Template Editor Concepts Guide and your post (@wydnaa) and see how this works .As for how we would calculate this manually, I'd just divide the result but the expected value (in our case 0.02 ppm) and multiply this by 100…
I have a GC 6850 with an FID. I'll have to upgrade to Windows 10 soon, because Windows will no longer provide security updates for Windows 7. If I upgrade my computer to Windows 10, is there a ChemStation version that's compatible with the 6850 and Windows…
Hi, I am using a 6890 GC in split mode with an isothermal temperature and no flow ramp and operating in constant pressure mode. Please can you advise how using the setting constant makeup flow for the FID detector is different to constant column and makeup…
Won't start without a "Mating Connector"
I use RS232 to control the pump. The mating connector is not present,
The manual says short pins 4 and 5 and pins 8 and 9 of the IO port.
This results in ramp-up and fail.
What is the correct wiring for…
Hello,
Our 6545 QTOF has been idle for a few weeks. When I checked the computer today, I found that "communication failed" errors had started appearing a few days after the instrument was last put to Standby. I'm not sure what happened as I don't think…
Hi, We observed an error during autotune of QQQ GCMS as "Peak width gain failed", When it was occurred and what is the reason for the repeat error, Autotune was not completed due to " Peak width gain failed".
Please suggest the recommendations and possibility…
Hello Michael,
It's kind of a yes and no answer. Technically, the wavelength calibration will have failed because the strontium wavelength was not found - so you will see this if you check the results. Practically this is unlikely to impact operation…
My manager is wanting me to add pass/fail system suitability assessments to my reports/processing methods. In order to limit my validation work and minimize the number of report templates that I am maintaining, I am trying to keep the report adaptive…
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
Scratches on AriaMx optical modules can lead to a reduction in their performance.
Background
Scratches on an AriaMx optical module are shown in Figure 1 .
Figure 1 ....
This Information Applies To: Agilent MassHunter Qualitative Analysis Software
Issue
Error message prompted “Access to the path C:\Users\AgilentMad\AppData\Local\Temp\FILESPEC.TXT is denied" during search using NIST MS Program in MassHunter Qualitative...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
When sending a run configuration from the AriaMx PC software, no run configuration is transmitted. The expected blue confirmation icon does not appear at the bottom of the touch...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
Can the AriaMx software be used on Windows 11?
Resolution
The AriaMx a nalysis software 2.0 has not been validated for Windows 11, so Agilent...
This Information Applies To: Agilent AriaMx real-time PCR system
Issue
How to control more than one AriaMx with one PC.
Resolution
If you connect the PC and instruments using an ethernet cable, you will not be able to establish multiple connections...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
In the Export Data menu, after exporting data in a LIMS format, the output file's name is incomplete.
Background
An example of everything after...
This Information Applies To: Agilent AriaMx real-time PCR system, AriaMx analysis software
Issue
The AriaMx Data saving behavior when priming experiments from the PC is dependent upon whether the user is logged in or a Guest and whether the user...
This Information Applies To: Agilent OpenLab CDS
Issue
Sequence Creation Template allows users to create a sequence template that identifies the order of injections or actions in the sequence.
This article outlines the step-by-step instruction...
This Information Applies To: Agilent 6100 and 6400 Series LC/MS Systems
Issue
Tuning a mass spectrometer involves optimizing the voltages applied to various optical elements in the ion path to achieve the required mass accuracy, resolution, and...
This Information Applies To: Agilent OpenLab ChemStation
Issue
In OpenLab ChemStation, creating a result set by combining multiple existing result sets can be useful in the following scenarios:
Combining single samples, sequences, or a combination...